Issue link: http://read.uberflip.com/i/1014206
21 fax 916-635-2970 info@spdexhaust.com Each kit includes 4 clamps. Tube Clamps Part # Tube Size ICE1625TTWCS 1.63" ICE1750TTWCS 1.75" ICE1875TTWCS 1.88" ICE2000TTWCS 2.00" ICE2500TTWCS 2.50" ICE3000TTWCS 3.00" Part # Tube size Size Range TBC125 1.25" 1.16"-1.47" TBC150 1.38"-1.50" 1.25"-1.56" TBC163/175 1.63"-1.75" 1.55"-1.83" TBC188 1.75"-1.88" 1.73"-2.03" TBC200 2.00" 1.86"-2.17" TBC213 2.13" 2.03"-2.34" TBC225 2.25" 2.16"-2.17" TBC238 2.38" 2.20"-2.51" TBC250 2.50" 2.34"-2.65" TBC263 2.63" 2.41"-2.72" TBC275 2.75" 2.66"-2.97" TBC300 3.00" 2.97"-3.22" TBC325 3.25" 3.16"-3.47" TBC350 3.50" 3.41"-3.72" TBC375 3.75" 3.66"-3.97" TBC400 4.00" 3.78"-4.09" TBC413 4.13" 4.03"-4.35" TBC500 5.00" 4.78"-5.09" TBC600 6.00" 5.78"-6.09" Light weight T-bolt clamps. Designed for silicone or rubber hose. T-Bolt clamps are commonly used on motorcycle exhaust to clamp thin wall tubing (.049 & under). "The icengineworks™ tack-welding clamps offer the unprecedented ability for the user to temporarily build, support and hold together complex tubular assemblies through concentric and gapless joints for preview and test-fit prior to tack welding them in place". Victor Franco President icengineworks™ T-Bolt Clamps icengineworks TM Tack-Welding Clamps Heavy Duty SS clamp w/ SS bolt Heavy Duty SS clamp w/ MS bolt Tube Size Size Range Bolt Size MIK301309-1 MIK301909-8 1.38" 1.35"-1.45" M7 MIK301310-4 MIK301910-0 1.5" 1.45"-1.56" M7 MIK301311-2 MIK301911-9 1.63" 1.56"-1.69" M7 MIK301312-0 MIK301912-7 1.75" 1.69"-1.84" M7 MIK301313-9 MIK301913-5 1.88"-2.00" 1.84"-2.02" M7 MIK301314-7 MIK301914-3 2.13" 2.02"-2.17" M7 MIK301315-5 MIK301915-1 2.25" 2.17"-2.33" M7 MIK301316-3 MIK301916-0 2.38" 2.33"-2.48" M7 MIK301317-1 MIK301917-8 2.50"-2.63" 2.48"-2.69" M7 MIK301318-0 MIK301918-6 2.75" 2.68"-2.87" M8 MIK301319-8 MIK301919-4 3.00" 2.87"-3.11" M8 Heavy Duty "bridge style" 304 Stainless Steel T-bolt clamps. Available with either stainless steel or zinc plated high strength steel bolt with cap ve nut. Strong enough for 16ga tubing. Preformed Exhaust Band Clamps These clamps are designed to be used on overlap joints such as muffler inlets and outlets. They are especially helpful in applica ons where ground clearance is an issue. Part # Tube Size TT250S 2.50" TT300S 3.00" TT350S 3.50" TT400S 4.00" TT500S 5.00" 304 Stainless Steel Band

