Issue link: http://read.uberflip.com/i/1014206
28 ph. 888-778-3312 www.spdexhaust.com Tube vs. Pipe Tubing is used for headers and exhaust systems. It is measured Outside Diameter (O.D.). Pipe is what your plumber usually uses. It is thick walled and is sized by approximate Inside Diameter (I.D.). Find clamps and retainer hardware on pgs. 20-21 Straight Tube (ST) Tube Size OD Part # Wall Thickness Materials Available 1.00" ST10018 .049 1008, 304 ST10016 .065 1008, 304 1.13" ST11318 .049 1008, 304 ST11316 .065 1008, 304 1.25" ST12520 .035 304 ST12518 .049 1008, 304 ST12516 .065 1008, 304 1.38" ST13820 .035 304 ST13818 .049 1008, 304 ST13816 .065 1008, 304 1.50" ST15020 .035 304, 321 ST15018 .049 1008, 304, 321 ST15016 .065 1008, 304, 321 1.63" ST16320 .035 304 ST16318 .049 1008, 304, 321 ST16316 .065 1008, 304, 321 1.75" ST17520 .035 304, 321 ST17518 .049 1008, 304, 321 ST17516 .065 1008, 304, 316, 321 1.88" ST18820 .035 304 ST18818 .049 1008, 304, 321 ST18816 .065 1008, 304, 321 2.00" ST20020 .035 304, 321 ST20018 .049 1008, 304, 321 ST20016 .065 1008, 304, 316, 321 2.13" ST21320 .035 304, 321 ST21318 .049 1008, 304, 321 ST21316 .065 1008, 304 2.25" ST22520 .035 304, 321 ST22518 .049 1008, 304, 321 ST22516 .065 1008, 304, 316, 321 2.38" ST23820 .035 304 ST23818 .049 1008, 304, 321 ST23816 .065 1008, 304 2.50" ST25020 .035 321 ST25018 .049 1008, 304, 321 ST25016 .065 1008, 304, 316, 321 Wall Thickness .060" - .065" = 16 gauge .045" - .049" = 18 gauge .030" - .035" = 20 gauge 1008 is an ASTM grade of carbon steel. Composition is 99% iron alloyed with manganese and carbon. It is characterized as having excellent surface finish and formability. To provide our customers the highest quality bends most of the mild steel tubing we stock is made by the following processes: Cold Rolled Electric Welded (CREW) Aluminum Killed Drawing Quality (AKDQ) The aluminum is used to remove oxygen while the steel is in a molten state. The resulting steel is more uniform, less prone to corrosion, and easier to form (draw). Flash Controlled - Flash refers to the raised seam of the weld running the length of the inside of the tube. Flash Controlled tubing has that seam reduced to less than .010". 304 is the most common grade of 18/8 stainless steel. The 18 & 8 refer to the percentage of chromium and nickel respectively. The chromium forms a protective oxide layer on the surface of the material, which is why it is characterized as "stainless or corrosion resistant". This property is not just skin deep as with coated metals. It has excellent forming and welding characteristics and can be polished to a mirror finish. All these properties have made it the preferred material for all kinds of fabrication. A269 Specifies the requirements of an annealing or heat treating process referred to as "bright annealed" meaning that it is free from scale. On its journey from ingot to tube, the material is work hardened and overheated from welding. The treatment restores the material to its original grain structure, reversing the adverse effects of the manufacturing process. The resulting material will withstand more elongation during forming / drawing procedures. 316 is similar to 304 with the addition of 2% to 3% molybdenum. This increases its corrosion resistance over 304 which makes it an excellent choice for use in a saltwater environment.

