Issue link: http://read.uberflip.com/i/1014206
38 ph. 888-778-3312 www.spdexhaust.com Our standard flange thickness is 3/8" (.375") 1018 c.r. steel. Add "T" for 1/2" thick. Add "S" for Stainless Steel. Add "TS" for 1/2" thick Stainless Steel. C8022x 6.49" 4.875" Supplied with 3/8"-16 threaded steel inserts. Add "L", "C", & "R" for individual flanges C8296x 4.875" Chevrolet / Small Block - 7-bolt pattern 7-bolt Pa ern Adaptor Kit Includes low-head Allen bolts to a ach adaptors to head. Adaptors must be match ported to your head. AC80120 For use on 23 0 non-spread port heads to allow the use of larger tube sizes than are possible with the stock 3.94" bolt pa ern. 3/4" thick material with TIME-SERT® replaceable steel inserts. Non-Spread Port Outer Flange Speier- 23 0 (D-port) Brodix- STD. port -8, -10, -11 (round port) -10X (square port), -18STDX (D-port) Pon ac- #867 Nascar (square port) All-Pro- 227 (square port) Chapman- 10X STD. (square port) 1.75" 1.88" 2.00" 2.13" Speier D-port C80233 Brodix 18 STDX C83633 C83634 C83635 Round C80223 C80224 C80225 C80226 Square - Ports are raised .150" from stock C82963 C82964 C82965 These flanges fit some non-spread port heads in addi on to the SPD adaptors above and other "Stahl-pa ern" adaptors. They are a non-spread port design. Spread-Port Pa ern 7 bolt (non-spread port heads) Dart- 15 0 , 16 0 , 18 0 Race Series Brodix- STD. port -13, -16 1.88" 2.00" 2.13" Round C84324 C84325 C84326 SAP replaces C8125x C84454 C84455 The port loca on is the same as Standard GM 18 0 and the bolt pa ern is the same as spread port. Reher-Morrison- For R-M aluminum adaptors for 15 0 - 18 0 heads. CFE- For CFE aluminum adaptors for 15 0 - 18 0 heads. 1.88" 2.00" 2.13" Reher-Morrison Round C836924 C836925 C836926 CFE C836124 C836125 C83612x C83692x 4.54"

