SCORE Journal

score-journal-april-2020

SCORE Journal - The Official Publication of SCORE Off-Road Racing

Issue link: http://read.uberflip.com/i/1236492

Contents of this Issue

Navigation

Page 28 of 114

2020 UTV Performance Parts Guide The latest upgrade components to turn your UTV from mild to BaJa ready By Mike Vieria UTVs are more capable than ever, but there are few areas where they can be improved to tackle the Baja desert, or to have more performance for an enjoyable off-road trip. We got in touch with more than 25 of the top UTV aftermarket companies to see what new products they have available from upgraded safety gear, to suspension systems, gear storage, performance engine upgrades and more. King Shocks www.kingshocks.com Polaris RZR 2.5 IBP Front Coilovers King UTV 2.5 IBP Coilover shocks fit your stock Polaris RZR s suspension or can create custom versions to work with long travel kits. They come with a Wide Range Compression Adjuster so you can precisely adjust compression from super soft to super firm. Comes with a finned reservoir. Fits 2018 and up Polaris RZR XP Turbo and 2020 RZR PRO two and four passenger models. MSRP $1041.30 each. Polaris RZR 3.0 IBP Rear Coilovers King UTV 3.0 IBP Piggyback Coilover shocks fit your stock or long travel suspension on 2018 and up Polaris RZR XP Turbo and 2020 RZR Pro model UTVs. The billet Wide Range Compression Adjuster has 20 positions so you can precisely adjust compression from soft to firm with a simple twist. Comes with a finned reservoir and fits both two and four passenger models. MSRP $1595 each. King Shocks www.kingshocks.com KING SCREW JACK The King screw Jack was designed as a tough lightweight jacking device to replace awkward and heavy floor jacks carried onboard race vehicles. The King screw jack is a mechanical design with a weight capacity of up to 3800 lbs and uses the same ¾” hex size that your lug nuts, and can be raised or lowered by your existing electric impact gun or lug wrench. The jacking boss is adjustable up and down to a full 16” high. MSRP $949.20    AGM www.agm-products.com MANUAL JACK AGM’s Manual Jack allows you to lift your UTV in seconds. Jack is just 24-inches long and weighs just 11 pounds, yet provides 14-inches of travel. Dished foot pad allows lifting on any terrain. Choose from a universal hook for general lifting or weld-on jack points that lock the vehicle in place so it can’t fall off. Uses the same ¾-inch (19mm) socket as lug nuts. MSRP is $850.00 ASSAULT INDUSTRIES www.assaultind.com COBRA COOLER BELT COOLING SYSTEM Assault Industries’ Cobra Cooler is a coolant injection system designed to reduce clutch housing temperatures in order to dramatically reduce the risk of belt failure and the damage it can cause. The cooler can lower the temperature by up to 50 degrees by spraying a fine mist of distilled water into the clutch housing air intake tube at the flip of a momentary switch. MSRP is $449.99 ASSAULT INDUSTRIES www.assaultind.com PHANTOM BILLET CONVEX SIDE MIRRORS Assault Industries Phantom Convex Side Mirrors feature ultra-thin, lightweight, low-profile styling. Constructed of 6061 T6 aluminum and stainless steel with raw aluminum finish and black anodized detailing. Mirrors can be rebuilt if damaged and come with a limited lifetime guarantee. Includes clamps for mounting to roll cages from 1.5-inches to 2-inches. MSRP is $309.99 per pair ON-THE-G0 UTV TOOL KIT The Assault Industries’ On-The-Go Tool Kit is specifically designed fit the needs of UTV enthusiasts. The 60-piece kit provides a simple, lightweight solution for tackling most jobs. The kit includes 3 sizes of ratchet drives, a variety of extensions and sockets, screwdrivers, combination wrenches, hex and Torx key sets, long-nose and locking pliers, a ball-peen hammer, and an adjustable wrench. It all fits in a sturdy no-noise pouch that keeps everything organized, ready to use, and quiet while on the go. MSRP is $349.99 BILLET HIGH CLEARANCE RADIUS RODS FOR CAN AM X3 XRS Assault Industries’ Billet High Clearance Radius Rod Kit provides additional clearance for the Can Am X3 XRS’ rear suspension over uneven terrain. Constructed of high quality aircraft grade aluminum, the kit provides improved strength and rigidity over the stock rods, and includes high-performance chromoly adjustable Heim bearings. The kit is a direct bolt-on installation and has a hard anodized black finish. MSRP is $1,199.99 BAJA DESIGNS www.bajadesigns.com HEADLIGHT KIT FOR POLARIS RZR PRO XP Baja Designs’ Headlight Kit for the Polaris RZR Pro XP is a six-lamp kit that includes four S1 spot and two S1 wide cornering LED lights, along with brackets and plug-and-play wiring harness for easy installation. Housings are hard anodized, powder coated cast aluminum and lenses are hard-coated polycarbonate. Lamps are waterproof and submersible, and have replaceable lenses and optics. MSRP is $949.95 HEADLIGHT KIT FOR CAN AM X3 Baja Designs’ Headlight Kit for the Can Am X3 provides a substantial light upgrade with a low amperage draw. The six-lamp kit includes four S1 spot and two S1 wide cornering LED lights, along with brackets, fascia, and plug-and-play wiring harness. Housings are hard anodized, powder coated cast aluminum and lenses are hard-coated polycarbonate. Lamps are waterproof and submersible, and have replaceable lenses and optics. MSRP is $949.95 LP4 PRO LED LAMP KIT Baja Designs’ LP4 Pro LED Lights are 5.1-inches high and wide, and 3.2-inches deep producing 7,050 forward projecting lumens and 1,700 peripheral lumens (8,750 total) Lamps provide a 200-degree spread of useable light and use Direct Ducted Cooling technology. Features include a hard anodized machined aluminum housing, billet machined aluminum, hard coated polycarbonate lenses, waterproof and submersible lamps with replaceable lenses and optics. Available in clear or amber and includes two lamps and wiring harness. MSRP is $849.95 BAJA DESIGNS www.bajadesigns.com ONX6 HYBRID LED AND LASER LIGHT BAR Baja Designs’ new OnX6 Hybrid LED and Laser Light Bar is designed as the ultimate lighting package projecting light 350% farther than the conventional OnX6 light bar. The 10-inch bar projects two laser chips and four LED chips through a High Speed Spot optic for a far-reaching, smooth blend of light. Housing is aircraft grade anodized aluminum and bezel is billet machined aluminum. Lens is hard coated polycarbonate, and lens and optics are replaceable. Lamp is waterproof and submersible. Bar is also available in sizes up to 50-inches. MSRP for 10-inch bar is $999.95 BLACK RHINO PERFORMANCE www.blackrhinoperformance.com BILLET CRANK SEAL PROTECTOR FOR POLARIS RZR Black Rhino’s Billet Crank Seal Protector helps shield your Polaris RZR from further damage when a belt breaks. It prevents belt debris from destroying your crankshaft seal and leading to oil leaks and expensive repairs. Fits Polaris RZR 2011-2013 XP900 and XP4900, and 2014-2018 XP1000. MSRP is $39.99 BILLET TRANSMISSION SEAL PROTECTOR FOR CAN AM X3 Black Rhino’s Billet Transmission Seal Protector helps defend against damage to the input shaft seal of the Can Am Maverick X3 when a belt breaks. The additional protection can prevent belt debris from causing oil leaks that lead to expensive repairs. Fits variety of 2017 and 2018 Can Am Maverick models. MSRP is $49.99 BLACK RHINO PERFORMANCE www.blackrhinoperformance.com LAP BELT REALIGNMENT BRACKET FOR POLARIS RZR Black Rhino’s Lap Belt Realignment Bracket for the Polaris XP1000, 900XC, and 900S adds comfort to your lap belt system while helping to prevent belt fatigue. Constructed from American steel and powder coated for strength and good looks, the bracket also includes Grade 8 hardware. MSRP is $42.95 BILLET REPLACEMENT FRONT DIFFERENTIAL SPRAGUE These Billet Spragues are precision machined from 7075 aircraft aluminum and replace fragile O.E. plastic differential spragues for increased strength and durability. Designed to use existing factory rollers and stock H-clips. For Polaris RZR XP1000 and XP1000 Turbo. Priced at $129.99 COGNITO MOTORSPORTS www.cognitomotorsports.com CAMBER ADJUSTABLE FRONT LOWER CONTROL ARM KIT Cognito’s Camber Adjustable Front Lower Control Arm Kit is a stock replacement fitment that provides increased ground clearance, improved strength, lighter weight, and converts from ball joints to 7/8-inch Uniball. Arms are made from 1 3/8-inch tubing with a black powder coat finish, and include bushings, sleeves, and hardened spindle pins. Fits a variety of Can Am Maverick X3 models. MSRP is $849.00 COGNITO MOTORSPORTS www.cognitomotorsports.com UNIBALL OE REPLACEMENT FRONT UPPER CONTROL ARM KIT Cognito’s Uniball OE Replacement Front Upper Control Arm Kit deletes the stock ball joints and converts to a 7/8-inch Uniball. Arms use a boxed alloy sheet steel design for extreme strength and lightweight. Kit includes hardened spindle pins, bushings, and sleeves. Finished in black powder coat for durability and good looks. Fits a variety of Can Am Maverick X3 models. MSRP is $1,249.00 UNIBALL OE REPLACEMENT TRAILING ARM KIT Cognito’s Replacement Trailing Arm Kit for the Can Am X3 provides more ground clearance and superior strength over the OE trailing arms. Constructed of high-performance, boxed, alloy sheet steel for strength and rigidity to handle severe use. Kit includes all hardware for direct replacement of stock arms. Finished in black powder coat. MSRP is $2,699.00 FRONT BUMPER FOR POLARIS Cognito’s Front Bumper for the Polaris RZR XP Turbo features a stylish sheet metal and tubing design with stainless steel accents. Sturdy OEM-certified mounting hardware allows for easy installation and protection. Includes mounting provisions for LED light bar or pods and comes in a black powder coat finish. MSRP is $429.00 DRAGONFIRE RACING www.dragonfireracing.com KRX HARNESS MOUNTING BRACKETS Dragonfire Racing’s KRX Harness Mounting Brackets offer everything you need for proper mounting of harnesses in the Kawasaki KRX Teryx 1000. It uses three factory chassis points for a strong, rigid mounting of 4 or 5-point harnesses. Anchors constructed of 3/16-inch laser-cut steel. Includes four quick-release harness tabs. The easy to install kit equips one two-seat vehicle. MSRP is $129.99 MULTI-FIT REAR MUD FLAP KIT Dragonfire Racing’s Multi-Fit Rear Mud Flap Kit helps keep debris away from CV boots, axles, shock shafts, and brake lines. Flaps are made from reinforced belted rubber and mounts are high-strength steel with black powder coat. Includes all hardware for mounting to rear trailing arms of most UTVs. MSRP is $129.99 LED CHASE LIGHT Dragonfire Racing’s LED Chase Light adds safety for recreational riding. It features red, green, and amber lights with multiple flash patterns. The dust and water-resistant light has an aluminum housing and includes mounting brackets, wiring harness, and switches for power and pattern. Available in 27 or 36-inch lengths. MSRP is $179.99 for 27-inch and $199.99 for 36-inch version FACTORY UTV www.factoryutv.net ULTIMATE HALF-INCH SKID PLATE KIT FOR POLARIS RZR PRO XP Factory UTV’s Ultimate Half-Inch UHMW Skid Plate Kit provides protection for the complete undercarriage of the vehicle. Constructed of Ultra High Molecular Weight ½-inch thick material to provide a lightweight, rugged, slick, abrasion-resistant surface to safeguard your RZR without robbing you of a significant amount of ground clearance. The Ultimate Kit includes a full-coverage skid plate, rock sliders, A-Arm guards, and trailing arm guards. MSRP is $1,346.25 ULTIMATE 3/8-INCH SKID PLATE KIT FOR HONDA TALON Factory UTV’s Ultimate 3/8-Inch UHMW Skid Plate Kit provides substantially improved protection for the full underside of the vehicle as compared to OEM skid plates. Constructed of 3/8-inch UHMW material for lightweight, rugged protection. The Ultimate Kit includes the main skid plate, A-Arm guards, trailing arm guards, and rock sliders. MSRP is $1,220.17 DUAL CLAMP SPARE TIRE MOUNT FOR KAWASAKI TERYX KRX 1000 Factory UTV’s Dual Clamp Spare Tire Mount for the Kawasaki Teryx KRX 1000 allows easy mounting of a spare tire to your roll cage. Constructed of powder coated steel tubing, the rugged tire mount allows positioning to avoid blocking vision through the rear view mirror and to allow 25 inches of clearance between the vehicle bed and mount. Designed for stock front tire wheel and offset, but custom designs are available for aftermarket wheels and tires. MSRP is $273.90 FACTORY UTV www.factoryutv.net BOLT-ON FRONT INTRUSION BAR FOR YAMAHA YXZ 1000 Factory UTV’s Bolt-on Front Intrusion Bar for the Yamaha YXZ 1000 provides maximum structural support and protection against objects entering the cockpit. Constructed with lightweight tubular steel with welded 1-inch V-bars and a 1 ¾-inch cross bar with steel collars. Black powder coated bar bolts to stock mounting locations. MSRP is $273.90 FOX www.ridefox.com CAGE FOR POLARIS RZR XP PRO Fox Factory’s new Cage for the Polaris RZR XP Pro uses 1.75-inch tubing for the main construction and 1.25-inch tubing for windshield bars and B-pillar center tie-in, with fully boxed corner “taco” gussets for maximum strength. Cage includes a .060-inch thick aluminum roof in raw finish. MSRP is $1,600.00 GATES BELTS www.gates.com G-FORCE REDLINE CVT BELTS Gates G-Force Redline CVT Belts use an optimized, patented EE compound to maximize axial stiffness to enable them to run at higher continuous torque loads. With greater heat and wear resistance, the G-Force Redline belts are engineered to provide better acceleration, higher top speeds, and improved durability in the most extreme off-road environments. Available for a wide range of UTV applications. MSRP ranges from $119.95 to $179.95 G-FORCE OFF ROAD www.gforceor.com UTV DOOR BAGS G-Force’s Door Bags provide extra storage for your UTV. They fit stock door frames and feature a water-resistant zippered design, no-sag reinforced construction, and an internal cell phone pouch. Available for Polaris RZR and Can Am X3 models. The Polaris version includes a removable knee pad. MSRP is $84.99 per pair HMF RACING www.hmfracing.com HMF EXHAUST SYSTEMS FOR POLARIS HMF’s Exhaust Systems for the Polaris RZR Pro XP are available in four different styles and in single and dual versions. Dual systems all use 16-inch silencers, and include a powder-coated aluminum license plate bracket. Slip-On systems use the original downpipe and turbo heat shields, while Full Turbo-Back Systems replace all exhaust components after the turbo, with the exception of the heat shields. The 4 and 5-inch diameter systems are designed for lighter weight and varying amounts of increased performance and noise reduction. MSRP ranges from $759.95 to $1039.95 ROCK SLIDERS FOR POLARIS RZR PRO XP HMF’s Rock Sliders for the Polaris RZR Pro XP provide side impact protection against rocks and other obstacles. Constructed of .095-inch steel tubing, the rock sliders mount to existing points on the vehicle’s frame and include all hardware. Available in colors to match factory paint. MSRP is $399.95 HMF RACING www.hmfracing.com DEFENDER HD FRONT BUMPER AND EXO GUARDS FOR POLARIS RZR PRO XP HMF’s Defender HD Front Bumper and Exo Guards for the Polaris RZR Pro XP provide extra protection for the front end of the vehicle. Both are constructed of .095-inch steel tubing, and have color options to match the factory paint scheme. The bumper includes a 3/16-inch aluminum skid plate with a mount for LED lighting, and all necessary hardware. The Exo Guards add further reinforcement to the vehicle by connecting from the bumper to the factory cage. MSRP for bumper is $369.95 and $229.95 for Exo Guards DEFENDER REAR BUMPER FOR POLARIS RZR PRO XP HMF’s Defender Rear Bumper for the Polaris RZR Pro XP is constructed of .095-inch steel tubing and easily mounts to the frame of the vehicle. Designed to work with both stock and HMF exhaust systems. Available in colors to match factory paint and includes a license plate bracket. MSRP is $299.95 IMPACT RACE PRODUCTS www.impactraceproducts.com IMPACT GRIP STEERING WHEEL Impact’s Grip Steering Wheel is designed to improve steering input and comfort for improved driving precision. The suede-wrapped wheel has a diameter of 13.75 inches and a 3.75 deep dish, and includes a yellow stripe for quick identification of center. MSRP is $250.00 KC HILITES www.kchilites.com GRAVITY PRO6 LED LIGHT BAR KITS KC HiLites’ Gravity Pro6 LED Light Bar Kits are individually designed for a variety of popular makes and models of UTVs. They include five, six, or seven Gravity LED G6 inserts, depending on the specific vehicle. The optics are available in spot, driving, and wide beam patterns. KC’s Infinity Ring system provides adjustable linking and expandable width. Kits include mountings for individual vehicles and all wiring and installation hardware. MSRP range $1,239.99 to $1,749.99 FLEX LED LIGHT BAR KITS KC HiLites’ FLEX LED Light Bar Kits are individually designed for a variety of popular makes and models of UTVs. Bars include fifteen to twenty FLEX LED cores, depending on the specific vehicle. Optics are a blend of long distance and spread beam patterns to provide maximum forward output, combined with improved peripheral illumination. Lamp housings and light cores are die-cast aluminum. Kits include vehicle-specific mounting hardware and wiring harness. MSRP ranges from $1,361.99 to $1,941.99 KC HILITES www.kchilites.com MULTI-FUNCTION REAR FACING CHASE LED LIGHT BAR KC HiLites’s 28-inch Rear Facing LED Chase Bar features integrated tail and brake lights, amber dust lights with strobe capability, and white floodlights. Made to enhance safety on the race course or trail, and meets street-legal standards. The low-profile bar uses a lightweight extruded aluminum housing and a shatterproof polycarbonate lens. MSRP is $403.99 MTZ 40-DEGREE UNIVERSAL TUBE CLAMP MOUNTS KC’s Universal Tube Clamp Mounts offer a versatile, cost-effective solution for mounting lights or accessories to vertically angled tubular surfaces such as UTV A-pillars and roll cages. Mounts fit tubing diameters of 1.5 to 2-inches. Constructed of carbon fiber reinforced polymer, the mounts feature an extruded rubber sleeve to protect paint and improve grip. Fits most standard light mounting bolt sizes. MSRP is $19.99 per pair Klock Werks www.getklocked.com Switch Knockout Device Mount Designed to install easily from the front of the dash, this universal UTV rocker switch mount easily assembles in a standard dash switch knockout slot and allows quick access to cell phones, devices and gauges. An ultra-strong magnetic interface and mount retention lip secures devices in the most severe of off-road environments. Simply install the Switch Knockout Device Mount with included hardware, attach the razor-thin iOadapt stainless steel adaptor to your device, and instantly connect to the powerful iOcore magnetic carrier. MSRP $99.95 Klock Werks www.getklocked.com UTV Flare™ Windshield for Honda Talon Klock Werks UTV Flare™ Windshield for Honda Talon was recently named by Powersports Business magazines as one of the “Nifty 50” 2020 award recipients! The Honda Talon is built for the extreme, so the windshield used should be built the same way. Made from incredibly durable polycarbonate, hard-coated on both sides, and designed to greatly reduce helmet shake, dust and debris in the cab, the UTV Flare™ Windshield lives up to the job. MSRP $399.95 MASTERCRAFT www.mastercraftsafety.com MASTERCRAFT Y-TYPE SPARE TIRE HOLD DOWN Mastercrafts’s Y-Type Spare Tire Hold Down is designed for UTVs and is constructed of sturdy 1 ¾-inch webbing. It features a large-handled ratchet for tightening and clip-in ends for ease of use. In black only. MSRP is $89.95 PCI RACE RADIOS www.pciraceradios.com TRAX PLUS STEREO INTERCOM PACKAGE PCI Race Radio’s Trax Plus Stereo Intercom System provides true stereo sound through separate left and right channels. It features a digitally controlled VOX, increased RF filtering, and dual audio amplifiers. Bluetooth capabilities allow cell phone calls or music to be played from your phone and controlled through one-touch operation. Optional Digital Signal Processing removes all noise other than your voice for clear communications in noisy vehicle environments. Available with cables for two-seat, four-seat, or five seat operation. MSRP starts at $899.95 PCI RACE RADIOS www.pciraceradios.com LOWRANCE ELITE-7 TI 2 TOUCH SCREEN GPS The Lowrance Elite-7 Ti 2 Touch Screen GPS includes a high-resolution 7-inch touch screen, along with high-end functions and features at an affordable price. Wireless network capabilities allow file sharing and smartphone notifications. Uses a built-in antenna or an optional external antenna. MSRP is $549.99 RACEAIR BOOST DUAL PCI’s Raceair Boost Dual provides a high volume of forced air in a sleek, easy-to-install package. It features a variable speed control, lightweight billet housing, and brushless DC motor. Mounts available for various size roll bars and can be fitted upside down or sideways. Includes pre-filter and filter. Optional remote control with 10-ft. cable available. MSRP is $399.95 w/o remote, $499.95 with remote control PRO ARMOR www.proarmor.com 2020 POLARIS RZR PRO XP CAGE SYSTEM Pro Armor’s 2020 Polaris RZR Pro XP Cage System is made of 1.75 and 2-inch DOM steel tubing and is MIG welded. The cage is a direct replacement for factory cage with no-drill installation. Available with or without intrusion bar and in signature Polaris color choices. MSRP is $1,749.95 PRO ARMOR www.proarmor.com 2020 POLARIS RZR PRO XP DOORS Pro Armor’s 2020 Polaris RZR Pro XP 2-Door and 4-Door kits provide rattle-free operation and are a direct bolt-on utilizing the OE paddle latches. The durable, lightweight aluminum doors feature a reverse-hinged design to allow nearly 180-degree opening. Kit includes premium hardware for easy installation. Available in signature Polaris colors. MSRP is $799.95 for two-door and $1,599.95 for four-door 2020 POLARIS RZR PRO XP/PRO XP 4 SPORT FRONT AND REAR BUMPERS Pro Armor’s Sport Front and Rear Bumpers for the Polaris RZR Pro XP and XP4 are made of strong, lightweight aluminum. Constructed with 1.75” tubing, the bumpers easily mount to the chassis. The front bumper provides additional mounting points for auxiliary lighting. Optional skid plates are available. MSRP is $299.95 front and $349.95 rear PRP www.prpseats.com STEERING WHEELS PRP’s Steering Wheels are made from high-strength aluminum with a matte black finish. They feature a 6-point bolt pattern to fit the majority of aftermarket hubs. Available in deep dish or flat, in leather or suede, and a choice of five colors. MSRP range is $159.00 to $169.00 DOOR BAG WITH KNEE PAD PRP’s Door Bags offer additional storage and knee protection for Polaris RZR and Can AM Maverick X3 models. Bags for Polaris are sold individually for each side and attach with factory screws and Velcro loops. Bags for Can Am are sold in pairs and attach with four Velcro loops. Available in black with a choice of piping colors. MSRP is $65.00 each for Polaris and $130.00 per pair for Can Am RAZORBACK TECHNOLOGY www.razorbackusa.com 3.0 EDITION INFRARED BELT TEMP GAUGE The Infrared Belt Temp Gauge allows for real-time monitoring of belt surface temperature, and features multicolor LED temperature alerts. It has an anti-glare screen and allows you to keep track of current, average, and high belt temperatures. Machined from steel and aluminum with waterproof sensors and connections. Available with silver or a variety of anodized color bezels, and with sensor cables ranging from 5 to 15 feet to fit a variety of applications. Prices range from $300 to $310 RAZORBACK TECHNOLOGY www.razorbackusa.com ENGINE TEMPERATURE GAUGE Razorback’s Engine Temperature Gauge is quick and easy to install, with no cutting or splicing of hose lines. The gauge and connections are waterproof and the LCD screen has a glare and scratch-resistant faceplate. Displays LED temperature alerts that change color as the coolant temperature rises. Housing is 2 1/16” machined aluminum cup. Different kits with sensors and wiring harnesses for simple installations on various makes and models. Choice of silver or variety of anodized color bezels. Prices range from $250 to $260 RIGID INDUSTRIES www.rigidindustries.com ADAPT E-SERIES LED LIGHT BAR Rigid’s Adapt E-Series LED Light Bar uses cutting edge Active View Technology to automatically provide an optimal beam pattern for vehicle’s speed. Patterns range from scene optics for low speed, to driving pattern for moderate speeds, and to spot beam for high speeds. The light patterns change gradually and smoothly utilizing an internal GPS module to sense vehicle speed. Additionally, the Adapt E-Series uses Active Power Management to continuously monitor input voltage to determine the status of the vehicle’s electrical system in order to provide the most output possible. If there is a voltage drop, the system automatically adjusts to gradually reduce the light’s power consumption until the voltage stabilizes. Constructed with aluminum alloy housing and heatsink and unbreakable polycarbonate lens. Available in 20, 30, 40, and 50-inch lengths, with MSRP range of $999.99 to $1,999.99 ROCKFORD FOSGATE www.rockfordfosgate.com 400 WATT STAGE 4 STEREO KIT FOR POLARIS RZR Rockford Fosgate’s 400 Watt Stage 4 Stereo Kit for Polaris RZR models features an Element Ready design to withstand a harsh outdoor environment, and requires no drilling or cutting for installation. Among the included items are a Punch Marine Compact AM/FM/WB Digital Media Receiver with a 2.7-inch display, 6.6-inch full range speakers, a 400-watt 4-channel amplifier, 10-inch subwoofer, speaker enclosures, wiring, and mounts. MSRP is $2339.99. RIDE COMMAND INTERFACE 400 WATT STAGE 4 STEREO KIT FOR POLARIS RZR Rockford Fosgate’s Ride Command Interface 400 Watt Stereo Kit for Polaris RZR models provides an interface harness to allow use of Ride Command as a source unit, rather than a PMX radio. Kit requires no drilling or cutting for installation and among the included items are an active noise reduction adaptor, 400 watt 4 channel amplifier, 6.5-inch front and rear speakers, 10-inch subwoofer, speaker enclosures and mounts, and Direct Connect wiring harness. MSRP is $2,039.99. 1000 WATT STAGE 5 STEREO KIT CAN AM MAVERICK Rockford Fosgate’s 1000 Watt Stage 5 Stereo Kit for the Can Am Maverick is designed for the ultimate in sound performance in a harsh outdoor environment with a 1000 watt 5 channel amplifier boosting its power. Also among the included features of the kit are a Punch Marine Compact AM/FM/WB digital media receiver with a 2.7-inch display, 6.5-inch front and rear speakers, a 10-inch subwoofer, speaker enclosures and mounts, and a Direct Connect wiring harness. MSRP is $3,269.99. ROCKFORD FOSGATE www.rockfordfosgate.com 400 WATT STAGE 3 STEREO KIT FOR POLARIS RANGER MODELS Rockford Fosgate’s 400 Watt Stage 3 Stereo Kit for Polaris Ranger models includes such niceties as a Punch Marine Compact AM/FM/WB digital media receiver with a 2.7-inch display, 6.5-inch front speakers, 10-inch subwoofer, 400 watt 4 channel amplifier, speaker enclosures and mounts, and a Direct Connect wiring harness for a clean, easy installation. MSRP is $1,659.99. SAVAGE UTV www.savageutv.com SAVAGE TOOL KIT The Savage Tool Kit provides you with a belt storage case to hold everything you need for a belt change on the trail. It includes a dust-tight case with rattle-free, customizable foam inside, 11-inch needle nose pliers, 18mm utility knife, and a ratcheting screwdriver with 8mm and 10mm sockets. Case will hold replacement belts for most UTV models, and mounts securely to the cage with included hardware. MSRP is $169.95 FIRST AID KIT Savage UTV’s First Aid Kit contains the supplies you need to handle an injury on the trail. Among the many items it includes are a tourniquet, various bandages and gauze pads, nitrile gloves, antibiotic ointment, antiseptic wipes, burn gel, emergency survival blanket and a first aid/CPR guide. The case is waterproof and airtight, and mounts to your roll cage with included hardware. MSRP is $189.95 SAVAGE UTV www.savageutv.com AIR JACK CASE Savage UTV’s Air Jack Case is designed to hold your Pro Eagle Phoenix Air Jack. The waterproof, dustproof case includes a base plate for the jack, custom foam inserts, and stainless steel mounting hardware for cage or flat mounting. Inside, there’s room for your jack, three 25-gram CO2 cartridges, a control valve, and a replacement rubber foot. MSRP is $169.95 CV PULLER Savage UTV’s CV Puller is designed to remove the front or rear CV from the differential of most UTVs using an impact driver. The tool works even if the CV boot or axle shaft is still in place. Includes a hard case, replacement rubber boot, and packet of anti-seize compound. MSRP is $259.95 S & B FILTERS www.sbfilters.com INTAKE PARTICLE SEPARATOR S & B Filters’ Intake Particle Separator ejects 94% of dust before it reaches the stock air filter, keeping your filter cleaner, protecting your engine and maximizing power in dust, snow, sand, and water. Billet clamps attach the unit to your roll cage in a variety of positions for a secure fit. Available for most popular UTV makes and models. Priced $399.00 to $449.95 S & B FILTERS www.sbfilters.com HELMET PARTICLE SEPARATOR S & B Filters’ Helmet Particle Separator removes 99.36% of dust without even using a filter. The system uses vortex pressure to spin dust to the side walls where it’s ejected by a scavenge fan. Because there’s no filter to clog, you always get a full flow of clean air to your helmet. Includes a variable speed controller. MSRP is $399.00 CLEANABLE DRY UTV FILTER S & B Filters’ Dry Cleanable Filters use proprietary, dry, synthetic media offering substantially better air flow than other filters, and can be easily cleaned up to ten times. Filters are constructed with premium silicone rubber for better sealing and longer life. Designed to withstand temperatures up to 400-degrees. Available for most popular UTVs. MSRP is $75.00 SSV Works www.ssvworks.com JVC HEAD UNIT UPGRADE SSV WORKS audio kits for Polaris and Can-Am UTVs now offers a JVC MR1 digital media receiver. The kit is a plug and play installation into Polaris RZR, Pro, and XP 1000 models, as well as Can-Am Maverick XP model UTVs (check the website for specific year, make, and models). The JVC upgrade also works on vehicles already equipped with SSV Works’ MRB3 Bluetooth Media Receiver as a direct head unit replacement. The JVC MR1 digital media receiver is IPX6-rated and features Bluetooth®, USB, a 2.7-inch color display, global tuner with weather band, 7-Band EQ, backup camera capability, and is SiriusXM-Ready®. MSRP $429.99 - $499.99. TRINITY RACING www.trinityracing.com FULL EXHAUST SYSTEM FOR POLARIS RZR PRO XP Trinity Racing’s Full Exhaust System for the Polaris RZR Pro XP is specifically designed for the 2020 Pro XP for significant horsepower and torque gains. It features brushed stainless steel mid and head pipes, dual aluminum mufflers, and billet exhaust tips and clamps. The fully Tig-welded system includes USFS-approved spark arrestors and oxygen sensor bung. Available in brushed, black, or black Cerakote finishes. MSRP is $899.99 for brushed or black finish and $1,059.99 for Cerakote finish STINGER EXHAUST SYSTEM FOR POLARIS RZR TURBO Trinity Racing’s Stinger Exhaust System for the Polaris RZR Turbo uses a single 14-inch aluminum muffler with a 2.5-inch baffle for improved exhaust flow to increase power and torque. The fully Tig-welded system features a stainless steel header pipe and billet aluminum exhaust tips and clamps. Includes a Quiet Core, USFS-approved spark arrestors, and oxygen sensor bung. Available in brushed or black finish. MSRP is $899.99 HIGH-FLOW HEAD PIPE FOR CAN AM MAVERICK X3 Trinity Racing’s High-Flow Head Pipe for the Can Am Maverick X3 is a direct bolt-on providing significant horsepower and torque gains. It allows for removal of the catalytic converter while retaining the stock muffler. The Tig-welded, stainless steel pipe includes an oxygen sensor bung. MSRP is $349.99 TRINITY RACING www.trinityracing.com WORLD’S BEST BELT FOR POLARIS RZR TURBO/RS1 Trinity Racing’s World’s Best Belt Line for the Polaris RZR is claimed to be the strongest belt on the market. Constructed of high-twist Aramid cord, the belt is designed to withstand the power of 400-horsepower machines. A precision-ground sidewall allows for smooth engagement, increased power transfer, and lower belt temperature. Also available for other Polaris and Can Am models. MSRP is $159.95 for RZR Turbo/RS1 UNIQUE METAL PRODUCTS www.uniquemetalproducts.com UMP CAN AM X3 TURBO INTAKE KIT Unique Metal Products’ Can Am X3 Turbo Intake Kit uses an 8-inch diameter, rugged, lightweight aluminum canister that features a swirling flow path to help clean itself. The supplied Donaldson element provides more than 2.3 times the uncovered element than stock and is 99.9% effective in removing harmful dust to protect your engine without power-robbing electric motors. Easy bolt-in installation drawing air from stock intake cover. Supplied with a 2 ½-inch aluminum intake tube for increased flow. MSRP is $407.00 UMP CAN AM X3 RACE INTAKE KIT Unique Metal Products’ Can Am X3 Race Intake Kit is designed for race cars with bodywork and firewall sections removed and will not fit a stock vehicle. It features a finned Donaldson element and 4-inch inlet for increased flow, with a 2 ½-inch outlet at the canister and 1 ¾-inch at turbo. Other fitting sizes are available. Canister can be fitted behind the firewall with the inlet facing rear for cleanest air. MSRP is $402.00 UNIQUE METAL PRODUCTS www.uniquemetalproducts.com UMP POLARIS RZR XP1000 INTAKE KIT Unique Metal Products’ Polaris RZR XP1000 Intake Kit uses an 8-inch diameter aluminum canister with stainless steel hardware. It features a Donaldson element with more than 30% more media than stock and a built-in particle separator. It bolts to the stock location, and uses stock plumbing, but unlike the stock system, it will not leak. Available for both turbo and non-turbo models. MSRP is $451.00 UMP POLARIS RZR XP1000 RACE INTAKE KIT Unique Metal Products’ Polaris RZR XP1000 Race Intake Kit bolts to the stock location and uses the stock hose to the throttles, but does require trimming of the plastic at the engine cover for the inlet scoop. It features a self-cleaning aluminum canister with stainless steel hardware and a Donaldson element. Available for both turbo and non-turbo models. MSRP is $473.00 VISION X www.vxautomotive.com XPL CHASER LED LIGHT Vision X’s XPL Chaser LED Light Bar provides multiple lighting functions for running and brake lights, solid or flashing amber light, and white back-up or cargo light. Lamp is just 2-inches tall, and is available in 28-inch or 35-inch length with universal side mounts. Priced $369 to $429 VISION X www.vxautomotive.com SHOCKER LED LIGHT BAR Vision X’s Shocker LED 12-inch Light Bar provides dual-function versatility with both a broad spot beam for long distance lighting for higher speeds, and a wide, elliptical beam for closer in lighting pattern for reduced visibility conditions in dust and fog. Lamp has watertight aluminum housing with a polycarbonate lens, and includes side wing mounts and 3-way toggle switch and wiring harness. Available with all white light or white distance and amber wide pattern light, and race version with more powerful amber lighting. The bar is also available in 20, 30, and 40-inch lengths. MSRP is $549.00 for 12-inch Trail models and $589.00 for 12-inch Race model UNITE MODULAR LED LIGHT BAR SYSTEM (VisionX_Unite_LightBar_3(1)) Vision X’s new UNITE Modular LED Light Bar System allows you to build your own light bar with endless configurations. A quick-connect mounting rail allows you to easily slide on and swap the modules. Each module features a 4-LED optic design in 12 different styles to meet your specific lighting needs. Rails available in straight lengths ranging from 6 to 50-inches, and curved rail lengths from 20 to 50-inches. MSRP is $89.00 to $239.00 for rails. MSRP is $59.00 for each pod HEADLIGHT UPGRADE FOR 2014+ POLARIS RZR Vision X’s Headlight Upgrade with 15-degree Optimus Halos for the 2014+ Polaris RZR consists of four LED lights and maintains separate high/low beam operation. Kit includes stainless steel brackets and specialized wiring adapters for easy plug-and-play installation. Lamps have aluminum housings and polycarbonate lenses. MSRP is $629.00 WALKER EVANS RACING www.walkerevansracing.com WALKER LINKS Walker Links replace the standard rear sway bar link to provide a smoother ride over rough and uneven terrain at all speeds, while providing a confident cornering feel. Allows vehicle shocks to act independently for 1.5-inches before engaging the sway bar as a rigid link under hard cornering or heavy loads. Kits for various Polaris and Can Am models. MSRP is $395.00 VELOCITY COILOVER SHOCKS Walker Evans’ new Velocity Coilover Shocks offer more controlled resistance than a standard piggyback or remote reservoir shock, providing better performance and ride. Shocks use 2.5-inch aluminum body and 7/8-inch stainless steel shaft, and are designed to fit OE mounts. They feature dual-rate springs and a dual rate compression adjustable reservoir. Shocks can be re-valved and rebuilt. Available for Polaris and Can Am models. MSRP is $1,799.98 WEISTEC/OPTIMA www.weistec.com www.optimabatteries.com OPTIMA BATTERY KIT FOR CAN AM MAVERICK X3 Weistec Engineering’s Optima Battery Kit for the Can Am Maverick X3 provides everything necessary for a bolt-in boost to the X3’s electrical system to handle upgraded lighting, communications, and stereos. The Optima Yellowtop battery delivers 575 cranking amps, along with impressive cycling capabilities for up to 3 times more life. It also provides 15 times more vibration resistance and faster recharging, while being virtually spill-proof. Kits includes battery and all mounting and connecting hardware for an easy installation. MSRP is $349.99

Articles in this issue

Archives of this issue

view archives of SCORE Journal - score-journal-april-2020