SCORE Journal


SCORE Journal - The Official Publication of SCORE Off-Road Racing

Issue link:

Contents of this Issue


Page 65 of 89

New Off-Road Products For 2021 Virtual SEMA 360 Show Offered A Look At What’s Coming For Off-Road Enthusiasts By SCORE Journal Staff The COVID-19 pandemic put a halt to just about every off-road show this year, but when the Specialty Equipment Market Association (SEMA) announced they were cancelling the world’s largest automotive aftermarket trade show, they quickly moved to set-up a virtual show they called SEMA 360. The event still offered OE and aftermarket manufacturers an opportunity to showcase their newest products for 2021 and we gathered many of the latest in the off-road categories that SCORE fans would appreciate. Ford Performance Calibration for 2019-2020 Ranger EcoBoost The Ford Performance engineered performance calibration is a 50-state legal calibration for 2019-2020 model Ford Rangers that increases power and improves drive-ability throughout the rpm range. Horsepower gain: 45 HP @ 4,500 RPM; Torque gain: 60 lb/ft @ 2,500 RPM. Ford Performance Raptor Off-Road Fog Lights Ford Performance worked with one of the most recognized names in off-road lighting, RIGID Industries, to develop this Off-Road Fog Light Kit which works exclusively on the 2017-2020 F-150 Raptor. The kit allows you to mount RIGIDs D-Series LED lights in the openings of the Raptor front bumper. Bronco Tube Doors The Ford Performance Bronco Tube Doors enhance the Bronco’s open-air experience while still providing a sense of comfort. Available for both two- and four-door Broncos, these steel doors were designed and engineered by Ford to offer an easy bolt on instillation, allowing customers to easily swap back and forth as desired. Cognito Motorsports Inc. Opening Door Kit for Can-Am X3 The door kit is completely bolt-on installation. The door latch is accessible inside and outside the vehicle and the billet handle completely replaces the OE latch and strap. The precision hinges will not sag over time and the gas strut assisted opening keeps the doors open for ease of use. Cognito products are proudly made in the USA. Price873.63USD Cognito Motorsports Inc. 3-Inch Leveling Kit for Dodge RAM The leveling kit yields 3 inches of front lift and levels the vehicle front to rear. It is direct bolt-on installation for 2014-2020 2500 4WD Ram trucks, and includes progressive-rate coil springs, HD fixed-length track bar and Fox Performance Series 2.0 Mono Tube IFP front and rear shocks. It takes 6-hours of DIY install time and is proudly made in the USA. Vision X Lighting ADV LED Light Cannon W Amber Halo Your favorite and only pod light with a smooth backlighting feature is now available in Amber! The ADV Series combines long-distance Iris Reflectors and Flood Optics to create the perfect driving that is truly unique. Coupled with a day-time running amber backlight. UNITE Curved LED Light Bar The Unite Modular LED Light Bar system brings lighting power and customization to the forefront by allowing you to build your light bar with endless configuration possibilities. Now available in Curved (comes in 20”-50” lengths), the Unite Bar enables you to choose, configure, and build your lighting style to what your ride needs. Bilstein B8 ZoneControl® shocks The ZoneControl® CR for Toyota Tundra pickups, is a position sensitive, direct-fit coilover kit that provides three compression zones and two rebound zones that are controlled by three independent pistons. The shocks provide increased control over all types of terrain and over large obstacles. BODY ARMOR Sky Ridge Pike 2-Person Tent 28 sq ft of comfortable interior accommodations Easily mounts to any truck, SUV or trailer with a roof rack or bed rack, using the included universal mounting brackets. The tent walls and roof are manufactured with 280GSM Ripstop reinforced polyester/cotton canvas, polyurethane coated for 2000mm waterproofing Fab Fours Inc. Matrix Series Ford Raptor Front Winch Bumper Combining the best aspects of the company’s Premium Winch Bumper and Vengeance Series to create a slim-fitting steel bumper for the Ford Raptor. Equipped to hold a 30” light bar, 4-cube LED lights, and a 9,000 lbs. winch, the Matrix Series offers style and utility. Available in a No Guard or Pre-Runner Guard option and fits 2017+ models. Front Runner Outfitters SLIMLINE II ROOF RACK KIT LOW PROFILE Made for 2009-CURRENT For Raptor pickups, the 1560mm/61.4” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2-Foot Rails to mount the Slimline II Tray. A Load Bed Rack Kit is also available. All Front Runner Racks are backed by a Limited Lifetime Warranty. Go Rhino Overland Extreme Rack MOLLE Accessory Panel This rack gear panel helps mount a variety of gear, trail tools and accessories to the exterior of the Overland Extreme Rack or most overlanding racks. Laser cut and pre-slotted holes and MOLLE strap holes make organizing gear easy GU Auto Tech Inc. PRO Off-road InfraRed Camera Systemm The GUA PRO Off-Road Thermal Far IR Night Vision System provides enhanced visual assistance when driving under impaired vision environments such as fog, rain, dust, smoke and low-light to no-light conditions. The system detects heat and provides visibility from up to 400 meters distance. Hellwig Products Pro-Series Helper Springs for 2017-2020 Ford Raptor The Hellwig EZ-990 Helper Springs for the 2017-2020 Ford Raptor allow for load leveling capacity for up to 2000 pounds. A single leaf design, the EZ-990 Helper Springs are easy to install and are adjustable rate. Like all Hellwig Products, the EZ-990 Helper Springs are made in the USA. PWR C&R Off-Road Radiator w Brushless Fans PWRs Universal Off-road Radiator (31”x 19” )uses high efficiency extruded tube spaired with the same fin technology used in race categories worldwide. Paired with Spal’s variable speed brushless fans, this provides the most amount of air traveling through your radiator at all times. Polaris Pro XP 2020+ Rear Mount Radiator and LTR Module PWR has engineered and developed an all-aluminum Radiator and Heat Exchanger for the Polaris Pro XP to be mounted in the rear of the chassis for racers. When paired with PWR’s intercooler, intake temps have never been over 150-degrees F, keeping intake air temps low and providing full power. Radflo Suspension Technology 2.5 GM 2019+ Truck Performance Suspension System Radflo Suspension Technology now offers performance suspension components for the 2019+ GM Trucks equipped with the TrailBoss or AT4 factory lift. The larger shock diameter allows for more oil flow through the piston and therefore a better performing system that lasts longer before fading SPC Performance Ford Ranger Front Upper Adjustable Arms Improve droop travel, drivability and tire wear with SPC’s adjustable front upper control arms for 2019+ Ford Ranger pickups. Fit bigger tires without rubbing fenders. With a greaseable ball joint & rubber isolated x Axis bushings, this arm is designed to correct alignment angles on standard height as well as lifted vehicles while maintaining factory ride quality. Supreme Suspensions 2013-2020 Polaris Ranger XP 900 2” Suspension Lift Kit This kit includes four front and rear lift brackets, and two swaybar relocating brackets that are plasma cut for precise fitment, and features a potective coating to prevent rust and oxidation. The system increases ground clearance and responsiveness while allowing up to a 27” tire. Completely bolt on and no cutting, grinding or welding required. TITAN Fuel Tanks Off-Road Universal Fuel Bunker Gasoline Transfer Tank The Fuel Bunker is a universal, bed mounted gasoline transfer tank for use in a wide array of off-road vehicles. It has a 12 gallon capacity, electric fuel pump, and internal storage space for gear. The locking lid features tie down points to secure additional cargo. It is made of military-grade cross-linked polymer and is backed by a lifetime warranty. Universal, and also available for Artic Cat and Can-Am, Polaris UTV specific. Truck Hero 6” Lift Kit for the 2019-2020 Chevy Silverado GM Sierra 4WD KING Shocks and SUPERLIFT united forces to create a precision-engineered lift system with perfectly matched and perfectly valved coil-overs and shocks. Each aspect of the Superlift Edition KING Shocks is a combination of advanced engineering using scientific computerized models and real-world testing. 3” Lift Kit for the 2019-2020 Ford Ranger 4WD ( This 3.5-inch UCA Lift kit for 2019-2021 Ford Ranger 4WD models adds more height. Made from a strong, die-formed design and constructed of DOM tubing. It features beefy gussets and CNC machined ball joint cups, with pre-installed MOOG ball joints and bushings for performance and durability. Incl. differential drop spacers, rear block kit, and rear Shadow Series Shocks. N-Fab N-FAB Trail Slider The N-FAB TrailSlider is a body-mount rock slider that features 3/16” heavy gauge steel tubing and gussets, and comes powder-coated in a durable, textured black finish. Easy to install with no special tools required. Fits a variety of Toyota 4-Runner, Jeep Wrangler, Toyota Tacoma, Chevy Colorado, and Ford Ranger models. Turnkey Trailers Race Transporter Turnkey Trailers specializes in custom all aluminum trailers created to meet the demands of off-road racing teams and customers. The company has created many unique units in collaboration with their customers. The company makes truck trailers, transporters, truck bodies and more. Warn Industries Ascent HD Bumpers Warn Ascent HD bumpers are designed for tough truck applications and allow users to install a mid-frame or large-frame winch up to 18,000 lbs. capacity. Bumpers include welded eyelets for shackles, available welded-on grille guards, ports for lights, and powdercoated finish. Available for select Chevrolet, Ram, and Ford trucks. Westin Pro-Series Rear Bumper “High and Tight” best describes the great looking new Pro-Series Rear Bumpers from Westin. This all new “off road style” rear bumper features a lightweight, slim, one-piece design, adding a modern, aggressive look. Built to improve ground clearance and departure angles when driving in more rugged terrain. Design Engineering Heel Protector When racing, the floor, firewall and transmission tunnel can get unbearably hot where it begins to feel uncomfortable, and even burn. DEI Heal Protector solves this with an insulated, easy on/easy off protection that blocks the heat and keeps you cooler the entire race. A sewn in wear surface will help the DEI Heal Protector last race after race. UTV Custom Cut Heat Control Kits A CNC cut, self-adhesive heat shield kit reduces the console and seat temperatures as well as blocks radiant heat in the cup holder and drivers right leg area. Installation is straight forward and are made to increase riding comfort. Kits are made for specific models including, 2019-2020 Polaris RZR 900 & 1000, 2017-‘20 Can-Am Maverick X3, and Honda Talon 2019-‘20 Hypertech Max Energy Spectrum Power Programmer – ZRZ The RZR Spectrum Programmer has application specific features that include: Exhaust Tunes, Top Speed Limiter, Adjustable Throttle Response, Cooling Fans, Idle Speed RPM control, Tire/portal gearing correction. Has shown horsepower gains up to 42 HP for Turbo and up to 9 HP for XP1000 applications plus it’s received CARB EO D-260-37. Mickey Thompson Tires & Wheels Baja Pro X Offered in six sizes to fit Side by Side powersports machines, the Mickey Thompson Baja Pro X UTV can be used for rock bouncing, rock crawling, mud bogging or just showing off. Features a Sticky compound that provides ultimate grip on hard surfaces, Dual Decoupling Grooves™ for flexibility, massive Sidebiters® for ultimate grip. Off-Road use only. RIGID Industries RIGID Chase Multi-Function LED Light Bar The RIGID Chase Rear Facing 28 inch LED Light Bar features 25 pre-programmed effects and 5 LED colors. Race compliant for series’ requiring strobing blue, amber, green & red. 25 pre-programmed features include strobe, scroll, & flash. 4 programmable modes; running and 3 auxiliary triggers. Running & trigger allow for customization of over 300,000 configurations. LINE-X Truck Gear by LINE-X AT Expedition Cooler The Truck Gear by LINE-X AT Expedition Cooler is made using rotationally molded plastic and can hold up to serious abuse while keeping ice frozen and drinks cold. Features all-terrain wheels to traverse uneven ground; a sturdy, retractable handle; dual-locking plates with stainless steel bottle openers; with a commodity shelf, chopping board, and cup holder. Available in 45qt and 60qt sizes. Backed by a 5-year warranty and available exclusively at LINE-X locations. Lincoln Electric Ranger® 260MPX™ Welder/Generator The Ranger 260MPX welder/generator is smaller, lighter and quieter than other machines in its class. It features an intuitive user interface with advanced technology to simplify operation and improve arc control. Clean generator power allows you to run a variety of tools and sensitive equipment. Miller Electric Multimatic® 235 Built for professionals in manufacturing/fabrication, MRO, construction fabrication, and education segments, the Multimatic 235 allows welders of all skill levels to be more efficient for all their MIG, flux-cored, stick and DC TIG welding needs. Setup is quick and easy, letting operators have faster uptime and weld with confidence. Dometic Dometic CFX3 Powered Coolers This powered cooler produces impressive cooling/freezing, allowing you to bring more of the food and drinks you love wherever you go. The CFX3’s robust design and ExoFrame construction is built for tough outdoor use. On-road, off-road, on the water or anywhere you want to enjoy fresh food and cold drinks. Thermo-Tec Generation II Copper Exhaust Wrap The Generation II Copper Exhaust Wrap improves heat resistance up to 30 percent more than current technology wraps. Creates more horsepower and reduces under-hood temperatures, increases exhaust scavenging, withstands continuous heat up to 2000 deg F, and contains no asbestos. Sold in 1 or 2 inch wide, 50 foot rolls with a low profile 1/16 inch thickness. ExoShield Off-Road Windshield Film ExoShield is a thin and completely invisible film installed to the exterior of the windshield to reduce the risk of rock chips by 6X. This razor-thin film absorbs the impact of small objects using proprietary nanoceramic hardcoat, that also prevents abrasion from wiper blades, UV degradation, and adds chemical resistance. ExoShield is installed by professionals worldwide.   Eibach Pro UTV Spring Systems Eibach put together a complete plug and play spring system that improves the performance of UTVs equipped with Fox 2.5 Podium internal bypass shocks with Live Valve or Podium RCT remote reservoir bypass shocks. The springs are true dual-rate and provide a smooth ride over rough terrain and the higher additional rate to prevent bottoming in the g-outs. Available for Polaris RZR and Can-Am Turbo RR. Aeromotive High volume fuel pump Yamaha YXZ1000R The Phantom Series fuel pump module is compatible with the factory plastic fuel tank and comes pre assembled with a 200 liters-per-hour fuel pump. The module is compatible with gas and supports up to 450 horsepower. The Aeromotive fuel pump module for 2016-2020 Yamaha YXZ1000R models is a direct drop-in unit with no drilling or fabrication required. Transferflow 80-Gallon Diesel Refueling/Transfer TankTransfer Flow, a manufacturer of premier American-made fuel tanks since 1983, introduces an 80-gallon diesel refueling tank for full-size pickups. The tank comes with mounting hardware, fuel cap, and rollover valve, and is made from 12-gauge aluminized steel. It’s perfect for manually fueling your diesel truck or equipment out in the field. Full-Race Ford Raptor / F150 V2 Intercooler Kit Our V2 design is the strongest and highest flowing intercooler available for the Gen2 Raptor and F-150 EcoBoost. Supports 1000cfm flow rate (70% more internal flow area than stock), and 1psi pressure drop at 700+hp airflow levels. Allows for pre runner style steel bumper, winch, or snow plow installations. AWE AWE 0FG ‘19+ Ford Ranger Exhaust The 0FG Exhaust is a rugged T304L cat-back configuration featuring their patented drone-canceling 180 Technology® to deliver refined aggression without any drone at cruising speeds. Comes complete with a bolt-on AWE BashGuard that allows the 0FG to end above the rear axle, tucked up away from danger when crawling rough terrain. The Wheel Group 9312 Dirty Life Mesa Race Wheel Made for off-road, the 9312 Mesa wheel features a simulated beadlock ring and is designed for off-road vehicles. The wheel comes in 17x9 and is available in a machined (shown) or a matte black finish. ARB Base Rack The new ARB Base Rack features a side-mounting dovetail system that is strong and allows for a low profile. The system doesn’t require a sub-frame support and is available in a variety of sizes and accessories to customize the rack to fit your application and needs. N-FAB UNIVERSAL BED MOUNTED RAPID STRAP N-Fab’s Universal Bed Mounted Rapid Strap is designed to work in any pickup bed or SUV cargo area with an available mounting surface. It will hold up to a 40” tire easily and securely, and mounts to most surfaces with three clips. Available with red, blue, or black straps. MSRP is $110.95. DEI Form-A-Barrier Kits Design Engineering Inc. offers a kit that consists of lightweight, formable thermal protection up to 1,300-degrees F. These barriers can be fastened with pins, screws or bolts and can be formed to any shape. Constructed from high-temperature rated foam material in between sheets of heat reflected thin dimpled aluminum. Comes in 12”x12” or 12”x24” sheets. Impact Mini-Racer Youth Suits Impacts new Mini Racer suits feature 360° full floating arm gussets and stretch knit back gusset for maximum mobility, while the built-in SFI 3.3 Spec arm restraints make the suits ideal for a variety of motorsports. Available in 4 color choices, All Black, Black with Blue Trim, Black with Red Trim, and Black with Grey Trim. The inset pant pockets offer storage for personal items off-track. Available as a one-piece suit, or a two-piece (jacket and pants) version, the suit is certified to the SFI 3.2/A-5 specification. AFE Power Ford Ranger Dynamic Air Scoop Manufactured to fit the factory or aFe Power’s Quantum Intake for 2019 and up Ford Ranger pickups, the Dynamic Air Scoop increases the amount of airflow to the air intake system for maximum performance. It utilizes the factory screws and is available in black, red and blue.

Articles in this issue

Links on this page

Archives of this issue

view archives of SCORE Journal - SCORE-Journal-November-2020