Performance & Hotrod Business February '14

Issue link:

Contents of this Issue


Page 77 of 99

n n n n Rod Shop New Products for Hotrod & Restoration Professionals. HOTROD Floor-Mounted E-Brake Cold-Weather Battery Charger Gennie Shifter, Denver, introduces a new stainless steel version of its best-selling Lo-Line floor mounted emergency brake. Offering an upgraded stainless steel appearance, the new brake handle also provides a solid feel for any high-end build. CTEK, Twinsburg, Ohio, introduces its new MUS 4.3 POLAR, a 12-volt, 4.3 battery charger designed to offer all-around charging with special cold weather performance. The POLAR mode is a special cold weather feature that delivers a higher 15-volt charge to ensure a 100-percent charge is achieved, even in the coldest conditions. It is available on the 0.8A, 4.3A and AGM Battery settings. The POLAR mode can optionally be set as required on any of the modes—motorcycle, car or AGM. Jack/Vise Pads & Inserts Moldable Sound Damper PROTHANE, Costa Mesa, Calif., presents its urethane Pads and Inserts for Jacks and Vises. The soft-yet-firm cushions provide protection against metal-to-metal contact and are impervious to grease, oil and transmission fluid. Products include Jackpad 3-, 5-, 7-1/4- and 9-inch jack stand pads that fit 1-1/2-by4-1/2-, 2-1/2-by-4-1/2- and 1-1/2-by-6-inch heads, and Vice Pad universal vise jaw pads with imbedded magnets to hold them on the jaws. Heatshield Products Inc., Valley Center, Calif., presents its db Shield Moldable Sound Damper. The db Shield is a thin, lightweight and highly moldable vibration damping material that consists of vinyl-based sheets. It is designed to mold and conform to irregular surfaces to achieve 100-percent bond, maximizing damping performance. The material will stretch up to 40 percent to make an irregular surface appear as if it has been dipped in plastic. Wire Separators & Clamps Beehive Lights Made 4 You Products, Pinon Hills, Calif., presents its updated line of colorful wire separators and clamps made of DuPont 6-6 Zytel nylon, with a patented, made-in-the-USA polymer added to the composite. The Smoothie wire separators are offered in 11 styles; each with multiple color options. They are available to fit 7-8.5mm wire and 10.5mm plug wires. T-Clamps are also available to attach fuel, brake and other lines to tube chassis or be bolted to frame rails and body panels. 76 n Performance & Hotrod Business PHBFEB_52-77.indd 76 n Watson's StreetWorks, Nashua, N.H., offers Beehive Lights, now in two sizes. New, smaller Baby Beehive lights measure under 2-1/4-inches in diameter at the billet base and just 2-1/8-inches tall, allowing for use in a wide variety of applications. Both the Baby Beehive and traditional Beehive lights are available in red or amber with dual-intensity wiring, and feature a billet aluminum base with a brushed finish that can be polished. Multiple bright LED lights provide years of trouble-free service. February 2014 1/7/14 2:27 PM

Articles in this issue

Links on this page

view archives of THE SHOP - Performance & Hotrod Business February '14