Braxton Harris Company is a manufacturer of over 10,000 quality plumbing products
Issue link: http://read.uberflip.com/i/25163
F12 1.1.11 SAMMY® • DRILL / DRIvE / DONE!! SUSPENDED ANCHORING SYSTEMS SAMMY X-PRESS® • Installs in seconds, saves time & installation costs. • Use in applications where easy access to the back of the installed fastener is prohibited. • No retaining nut required. • Patent pending. • UL listed. UL tested to comply with NFPA 13 standards. FM approved. SAMMY X-PRESS® NEW HANGERS • Expands to provide direct attachment in metal deck (22-20 ga.) & purlin or metal deck (18-16 ga.). • #s SXP20 & SXP35 tested in accordance with NFPA 13 & NEC standards. • Patent pending. PART # SXP 20 SXP 35 SXP 20 SXP 35 PART # SXP 20 SXP 20 PART # SXP 20 SXP 35 SXP 20 SXP 35 PART # SXP20 SXP35 APPROVALS FM FM UL UL APPROVALS UL UL APPROVALS UL UL UL UL STEEL GA. 12 ga. 12 ga. 22-12 ga. 18-12 ga. CONCRETE Structural Lightweight STEEL GA. Min. 22 ga. Min. 22 ga. Min. 16 ga. Min. 16 ga. DESCRIPTION Metal deck application Purlin application SAMMY X-PRESS® SIDE WINDER HANGER NEW • Expands to provide horizontal attachment in purlin (16-12 ga.). • SWXP35 tested in accordance with NFPA 13 standards. • Patent pending. PART # SSWXP35 PART # SSWXP35 APROVALS UL STEEL GA. 16-12 ga. ROD SIZE 3/8-6 DESCRIPTION Purlin application MAX. PIPE SIZE 3.5” APPLICATION Purlin PKG./CTN. 25/125 PART # SCZ2000 ROD SIZE 3/8-16 3/8-16 3/8-16 3/8-16 ROD SIZE 3/8-16 3/8-16 LOAD RATING 187 lbs. 187 lbs. 250 lbs. 250 lbs. MAX PIPE SIZE 4” 4” 2.5” 3.5” MAX PIPE SIZE 2.5” 2.5” APPLICATION Metal Deck Purlin Metal Deck Purlin THICKNESS 3000 PSI 535 PCF PART # SSXP20 SSXP35 PART # SSXP20 SSXP35 ROD SIZE 3/8-16 3/8-16 NEW • Pipe hanger for X-Treme roof pitches. - 89° in purlin. - 45° in metal deck for 12/12 pitch. • Patent pending. PIPE SIZE 3/4”-2” 3/4”-3.5” DESCRIPTION Metal deck application Purlin application SAMMY X-PRESS® UNIVERSAL HANGER INSTALLATION TOOL NEW • # SUXPIT universal tool includes: bit receiver, hex wrench & 25/64” drill bit. • Makes installation of Sammy X-Press® hangers, sidewinder hangers & swivel hangers as easy as DRILL / DRIVE / DONE!! PKG./CTN. 25/125 25/125 PART # SUXPIT DESCRIPTION SAMMY SADDLE® CONDUIT HANGER NEW Universal hanger installation tool CABLE/PIPE/ PKG./CTN. 25/125 STEEL THICKNESS 22-20 ga. 16-12 ga. TEST LOAD 750 lbs 1250 lbs PKG./CTN. 25/125 25/125 TRUSS/PIPE HANGERS FOR SWIVEL HANGER • Snap-nut anywhere onto threaded rod. • Non-corrosive & non-conductive. • Supports cable, pipe or conduit. • Use multiple hangers per rod. • Plenum rated. (Complies with National Electrical Codes.) • Plenum rated tie-wires included. • UL listed/Description: Cable hanger, Cat. No. 5 C-Z2000 Plenum rated, complies with NEC Standards. • US patent No. 6,146,076. DESCRIPTION 1/4” & 3/8” ROD SIZE ULTIMATE PULLOUT (LBS.) 181 25 Phone: 800-226-9198 E-mail: sales@BraxtonHarris.com Fax: 800-749-8329 PKG./CTN. TRUSS/PIPE HANGERS LUMINAIRE FITTING PIPE HANGER