Braxton Harris Company is a manufacturer of over 10,000 quality plumbing products
Issue link: http://read.uberflip.com/i/25163
I7 1.1.11 PIPE INSULATION/SLEEVING/WRAP SELF-SEAL LAP POLYETHYLENE PIPE INSULATION SELF-SEAL LAP POLYETHYLENE PIPE INSULATION (CONT'D.) 1" NOmINAL WALL THICKNESS: PART # DESCRIPTION NOm. ID NOm. CTS NOm. IPS NEW • Self-Seal Lap pipe insulation is specially manufactured with a factory applied high strength reinforced adhesive Lap-Seal-Tape. • It is pre-slit with a convenient single-pull tab for easy installation. • Meets the following specifications: 3/4" & below has a flame spread rating of 25 or less & a smoke development rating of 50 or less, as tested by ASTM E-84. 100% Closed-cell polyethylene. • Temperature use range of -40F to 200F • Low water absorption • Flexible polyethylene • Low K factor • UV resistant • Density - ASTM D 1667 • Water absorption - ASTM 1056 (UPS SHIPPABLE) DESCRIPTION NOm. ID SSLPI38-058 SSLPI38-078 SSLPI38-0118 SSLPI38-0138 SSLPI38-0158 SSPLI38-0218 SSLPI38-0238 1/2" 5/8" 7/8" • Thermal conductivity - ASTM C177 • Ozone resistance - ASTM D1171 • Air flow erosion - US181 SEC 16 • Flame spread - ASTM E 84 • Water vapor permeability - ASTM E 96 • Smoke density - ASTM E 84 *Please order by number of cartons, instead of feet. PART # NOm. CTS 3/8” NOmINAL WALL THICKNESS: SSLPI38-012 1-1/8" 1-3/8" 1-5/8" 2-1/8" 2-3/8" 5/8" 7/8" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" - 1/2” NOmINAL WALL THICKNESS: SSLPI12-058 SSLPI12-078 SSLPI12-0118 SSLPI12-0138 SSLPI12-0158 SSLPI12-0218 SSLPI12-0238 SSLPI12-0258 1-1/8" 1-3/8" 1-5/8" 2-1/8" 2-3/8" 2-5/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" - 2-1/2" (CARTON QUANTITY ONLY) PKG./CTN. NOm. IPS 1/4" 3/8" - - 1" 1-1/4" - 2" 3/8" - - 1" 1-1/4" - 2" - 480' 390' 318' 240' 192' 132' 96' 84' 324' 210' 168' 144' 120' 84' 72' 60' PS6R1-200 PS6B1-200 PS10R1-100 PS10B1-100 PS32R34-50 PS32B34-50 PS32R1-100 PS32B1-100 PART # SSLPI1-058 SSLPI1-078 SSLPI1-0118 SSLPI1-0138 SSLPI1-0158 SSLPI1-0218 SSLPI1-0238 5/8" 7/8" 1-1/8" 1-3/8" 1-5/8" 2-1/8 2-3/8 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" - 3/8" - - - 1-1/4" - 2" PIPE SLEEVING (POLYETHYLENE) NEW 120' 96' 84' 72' 60' 54' 42' • This underground protective sleeve is a flexible vinyl tubing that slips over water piping during installation. It allows for expansion & contraction for easy movement of piping to help minimize stress. • It gives protection from the lime reaction in concrete. • It is color-coded: red for hot & Blue for cold. • Our 32 mil. sleeve meets ASTM & So. Bldg. Code standards. DESCRIPTION WALL THICKNESS 6 mil. 6 mil. 10 mil. 10 mil. 32 mil. 32 mil. 32 mil. 32 mil. PIPE WRAP • Fiberglass. • Stops dripping from cold water pipes. • Helps prevent freezing. • Holds heat. PART # PW3-25 DESCRIPTION (Individually bagged) PKG./CTN. 3" x 25', with vapor seal tape 6/24 Phone: 800-226-9198 E-mail: sales@BraxtonHarris.com Fax: 800-749-8329 PIPE SIzE 1/2"-1" 1/2"-1" 1/2"-1" 1/2"-1" 1/2"-3/4" 1/2"-3/4" 1/2"-1" 1/2"-1" (Individually packaged) PKG./CTN. COLOR LENGTH Red Blue Red Blue Red Blue Red Blue 200' 200' 100' 100' 50' 50' 100' 100' 1 1 1 1 1 1 1 1 PKG./CTN. INSULATION/ SLEEVING/WRAP