Performance & Hotrod Business May '14

Issue link:

Contents of this Issue


Page 16 of 115

May 2014 n Performance & Hotrod Business n 15 Nozzle Holder-Check Valve Combo Snow Performance, Woodland Park, Colo., presents its new Nozzle Holder-Check Valve Combo that ensures safe, reliable water-methanol injection. Snow Performance developed its nozzle holder as a more reliable and consistent method to restrict unwanted directional fluid flow in the Boost Cooler water-methanol injection system. Designed to replace the solenoid or external check valve, it has been improved over standard designs with a larger sealing surface for increased reliability and safety and withstands the rigors of higher pump pressures and flow rates. OE-Performance Turbochargers MAHLE Aftermarket, Farmington Hills, Mich., offers its MAHLE Original turbochargers, manufactured to meet OE performance and quality requirements. Key features include double piston rings on the rotor shaft that reduce oil consumption and enhance protection against foreign particles, and high-speed compressor wheels that provide greater balancing precision, optimized speed stability and reduced running noise. The turbochargers enhance performance, reduce fuel consumption and lower exhaust emissions. Intercooler Sprayer Kit Design Engineering Inc. (DEI), Avon Lake, Ohio, offers its CryO2 Intercooler Sprayer Kit, designed to improve intercooler efficiency by as much as 50 percent and cool intake mani- fold air temperature as much as 35 percent. Created to fit any stock or aftermarket inter- cooler and using inexpensive CO2 to chill the intercooler, the kit features a 10-pound tank, brackets and all hardware including a cryogenic solenoid valve, arming, activation and WOT switches, and a 14-foot stainless steel braided supply line. It is suitable for most race and tur- bocharged vehicles. Turbocharger Fastener Kits Stage 8 Locking Fasteners, San Rafael, Calif., presents its Locking Fastener Kits for turbocharger applications. The easy-to-use kits provide assurance against horsepower loss or gasket failure created by loose nuts or bolts. The patented three-piece locking fastener assemblies are application-specific for either 6-point hex head bolts or nuts in both metric and imperial sizes. Depending on the application, a 4140 alloy steel bolt or nut, stainless steel locking retainer and spring clip are included, along with necessary hardware. LS Series Perimeter Plate Nitrous System ZEX, Memphis, Tenn., a COMP Performance Group member, presents its LS Series Perimeter Plate Nitrous System with three advanced nitrous technologies, each created to give LS applications a significant power advantage over conventional plate systems. Adjustable from 100 to 250 hp, the complete, race- ready system uses three cutting-edge technologies to provide optimum spray efficiency and fuel distribution for both cable and throttle-by-wire engines. It is a direct fit for all 90mm and larger, four-bolt-style throttle body/manifold combinations. There's A New Way (to add) OCTANE TM PHBMAY.indd 15 4/2/14 11:08 AM

Articles in this issue

Links on this page

view archives of THE SHOP - Performance & Hotrod Business May '14