Issue link: http://read.uberflip.com/i/401143
Ulti-Mate Connector Inc. • Ph. 714.637.7099 • Fx. 714.637.7464 • www.UltimateConnector.com PERFORMANCE DATA / MATERIALS AND FINISHES 10-M&F MATERIALS AND FINISHES Pin Contacts Beryllium Copper (C17200) per ASTM B194. Socket Contacts Copper alloy (C21000) per ASTM B36 Contact Plating Gold plated per ASTM-B488. 50 microinches min. is the standard thickness. Metal Shells Aluminum alloy per SAE-AMS-QQ-A-200/8, type 6061-T6. Finish is cadmium per SAE-AMS-QQ-P-416,TYPE II, CLASS 3, with suitable underplate with yellow chromate, this plating is not RoHS compliant. Or Finish Electroless Nickel plate per SAE AMS2404, class 3 or 4, .0005 minimum thickness. Insulator Material Shell Polyphenylene sulfide (PPS) per MIL-M-24519 GST 40F or ASTM D5927. Color Black. Interfacial Seals Fluorosilicone elastomer per MIL-R-25988. Standard on "M" Series socket face. Hardware Corrosion resistant steel per ASTM A 582/A582 or ASTM A 581/A581M, Passivated per SAE AMS–2700 18-M&F MATERIALS AND FINISHES Pin Contacts Beryllium Copper (C17200) per ASTM B194. Socket Contacts Leaded commercial bronze (C314000) per ASTM B140. Contact Plating Gold plated per ASTM-B488. 50 microinches min. is the standard thickness. Metal Shells Aluminum alloy per SAE-AMS-QQ-A-200/8, type 6061-T6. Finish is cadmium per SAE-AMS-QQ-P-416,TYPE II, CLASS 3, with suitable underplate with yellow chromate, this plating is not RoHS compliant. Or Finish Electroless Nickel plate per SAE AMS2404, class 3 or 4, .0005 minimum thickness. Insulator Material Shell Fluorosilicone elastomer per MIL-R-25988. Standard on "M" Series socket face. Interfacial Seals Polyphenylene sulfide (PPS) per MIL-M-24519 GST 40F or ASTM D5927. Color Black. Hardware Corrosion resistant steel per ASTM A 582/A582 or ASTM A 581/A581M, Passivated per SAE AMS–2700 10-M10 MECHANICAL CONTACT ENGAGING FORCE: 6 oz max. (Contact average is 3 oz.) CONTACT SEPARATING FORCE: 0.5 oz. min. CONNECTOR MATING FORCE: 10 oz. x number of contacts max. CONNECTOR UNMATING FORCE: 10 oz. x number of contacts min. VIBRATION: No damage or interruption detected (one microsecond sensitivity) EIA-364-28 Condition IV SHOCK: No damage or interruption detected (one microsecond sensitivity) EIA-364-27 Condition E DURABILITY: No mechanical or electrical defects after 500 matings. SALT SPRAY: No exposure of base metal or loss of performance after 96 hours for both Nickel and Cadmium plating 10-E 10 ELECTRICAL CONTACT RESISTANCE: 8 mΩ max.@ 2.5 A CURRENT RATING (SIGNAL CONTACTS): 3 A max. DIELECTRIC WITHSTANDING VOLTAGE: 900 VAC at sea level, 300 VAC at 70,000 ft. INSULATION RESISTANCE: 5,000 MΩ min. 18-E 10 ELECTRICAL CONTACT RESISTANCE: 8 mΩ max.@ 2.5 A CURRENT RATING (SIGNAL CONTACTS): 3 A max. DIELECTRIC WITHSTANDING VOLTAGE: 600 VAC at sea level, 150 VAC at 70,000 ft. INSULATION RESISTANCE: 5,000 MΩ min. 9