Turbo Diesel Register

Issue 75

Turbo Diesel Registry

Issue link: http://read.uberflip.com/i/478831

Contents of this Issue

Navigation

Page 127 of 139

128 www.turbodieselregister.com TDR 75 PRODUCT SHOWCASE . . . . Continued Mile Marker displayed a variety of winches, including an 18,000 pound hydraulic winch, which might be just what a user would need for very heavy pulling and long-duration service at each use. 75-28 Mile Maker 18,000 pound hydraulic winch. Joe Donnelly TDR Writer BD Diesel Performance PO Box 231 Sumas, WA 98295 33541 MacLure Rd. Abbotsford, BC, Canada V2S 7W2 800-887-5030 www.bd-power.com www.dieselperformance.com Standard Transmission and Gear 1000 NE 29 th Street Fort Worth, TX 76106 800-783-8726 www.standardtransmission.com Torco International Corporation 10652 Bloomfield Avenue Santa Fe Springs, CA 90670 562-906-2120 www.torcoracingoils.com Transfer Flow, Inc. 1444 Fortress St. Chico, CA 95973 800-442-0056 www.transferflow.com Mile Marker Recovery Gear 2121 Blount Road Pompano Beach, FL 33069 800-886-8647 www.milemaker.com RESIZING KIT FOR TRACKBAR ATTACHMENT POINTS ON THIRD GENERATION TRUCKS Does your Third Generation 4 x 4 truck wander all over the road? Have you had it in the shop, spent thousands on front end components and it still doesn't track like it should? There are numerous wear points that can contribute to excess play in the geometry of the truck's front axle and steering components. One of the first places you should look is at the truck's track bar. As you know, replacement of the bushings at both ends of the track bar is often a simple and cost-effective solution. However, what do you do if you find that there is wear and/or elongation of the mounting bracket holes on the frame or axle that the track bar is attached to? The only answer is to resize the bold the holes of the mounting bracket. This new product, the Big O Bushin kit, gives you the hardware to resize the brackets. Drill the brackets to accept the 1" diameter Big O Bushin(s) and install the bushings into the brackets. The special welded nut (the outer arm will catch against the frame) lets you tighten the standard size bolts through the standard size track bar bushings. Big O Bushin Kit: $195.00 a set Free shipping in the continental 48 states. 4X4 Parts Plus info@4X4plus.com 27956 N. Holiday Lane (208) 623-2393 Athol, ID 83801

Articles in this issue

Links on this page

Archives of this issue

view archives of Turbo Diesel Register - Issue 75