Performance & Hotrod Business - July '15

Issue link:

Contents of this Issue


Page 93 of 101

90 n Performance & Hotrod Business n July 2015 90 n Performance & Hotrod Business n July 2015 Heavy-Duty Transmission Pans PML Inc., Inglewood, California, offers a heavy-duty, Cast Aluminum Transmission Pan for 1980s Corvettes and Camaros, and vehicles with the GM Turbo- Hydramatic 7004R transmission. Thick walls increase the strength of the transmission case and the fins look good while dissipating heat from the fluid. A magnetic drain plug makes for easy oil changes. PML manufactures all its products in the USA. F-150 Cat-Back Exhaust MagnaFlow, Rancho Santa Margarita, California, presents its MagnaFlow and Off-Road Pro Series cat-back exhaust kits for 2015 Ford F-150 applications. The 3-inch bolt-on kits reduce exhaust backpressure while maintaining a deep, powerful performance tone. Annoying exhaust frequencies are dampened with a dense wall of acoustical absorbing material, and the straight-through muffler design prevents excessive heat retention, allowing the entire system to run cooler and last longer with no restrictions. They are made in the USA. Locking Gasket Trim-Lok Inc., Buena Park, California, presents Locking Gasket, an EPDM dense rubber extrusion designed to lock in the installation of stationary windows or windshields. Locking Gaskets provide a secure seal between a metal or fiberglass body panel and a glass or Plexiglas window. Available in several one- and two- piece styles with a lock-strip, the gaskets are made in the USA and highly resistant to environmental conditions including ozone, water absorption, sunlight aging and low temperature. Train Horn Systems Kleinn Air Horns, Tucson, Arizona, introduces its newest vehicle- specific, 100-percent bolt-on onboard Air & Train Horn Systems for 2014-'15 GM 2500HD and 3500HD diesel trucks that use U.S.-made, vehicle- specific brackets. The complete lineup of HDKITS feature various air horns and two levels of 100-percent duty cycle air compressors that require no cutting, welding or drilling. Every system includes a sealed Kleinn air compressor paired with a 3-gal- lon American-made steel air tank. Performance Dampers Fluidampr, Springville, New York, offers "The Original" Fluidampr Performance Dampers, made in the USA and featuring premium North American high-strength steel. Precision CNC-machined and balanced to higher-than-OEM toler- ances at an ISO 9001:2008 quality- certified facility in Springville, the dampers are race-proven since 1985 and available for popular domestic, import and diesel appli- cations. Modular Rears Mark Williams Enterprises Inc., Louisville, Colorado, offers its 9-inch Complete Modular Assembly, a 3.812 bore H-D alumi- num third member with 40-spline steel spool, 9-inch Pro-gears, gun- drilled 40 spline axles, MW brakes with lightened rotors, 37-1/2-inch wheel-to-wheel and 20-inch four- link centers standard. A 10-inch pitch diameter ring gear (trimmed to 9.5 inches) can also be used in the assembly. All MW components are engineered, manufactured, and tested in-house in the USA. P r o d u c t s

Articles in this issue

Links on this page

view archives of THE SHOP - Performance & Hotrod Business - July '15