THE SHOP

November '15

Issue link: http://read.uberflip.com/i/581245

Contents of this Issue

Navigation

Page 117 of 135

112 The Shop November 2015 Shop ToolS & equipmenT Sheet metal hole Cutter Kit Blair Equipment Co., Flint, Michigan, introduces a new Rotabroach Sheet Metal Hole Cutter Combo Kit. The new kit (part no. 11320) combines two popular kits into one convenient package. Included in the set are 13 sizes of cutters from 5/16 to 1-1/2 inches. Rotabroach cutters can drill holes three times faster and last 10-times longer than twist drills or hole saws. They are designed for use in all types of automotive and metal fabrication, maintenance and electrical applications, spot- weld removal and plug holes for welding. They are made in the USA. Four-post lift Rotary Lift, Madison, Indiana, presents its enhanced ARO14SW Four-Post Car Lift. The lifts feature Shockwave technology for fast raising and lowering of the vehicle, and interlocking spacers along the runways that enable technicians to place the turntables in various locations, so the equipment can be used on vehicles with wheelbases from 71 to 148 inches. The rise height has been extended to 78-3/4 inches, and the lifts also include improved drive-on ramps and a powder-coated hammer-tone paint finish. Dual-Action polisher Meguiar's, Irvine, California, introduces the MT300 Dual Action Polisher, a state-of-the- art professional dual-action polisher designed to help detailing technicians and avid car enthusiasts achieve improved cutting, polishing and finishing results. Designed by professionals, for professionals, the polisher has a lightweight, ergonomic form with features including billet counterweight with multi-bearing design, Meguiar's Digital Torque Management speed controller, and a wide 3,000 to 7,500 orbits-per- minute speed range for maximum control. Wire Feeder ESAB, Florence, South Carolina, introduces the Warrior Feed 404 HD, a heavy-duty, bench-top wire feeder designed to feed 0.030- to 3/32-inch wire at speeds of 50 to 800 inches per minute in applications such as high-volume fabrication, structural steel fabrication, heavy fabrication and others. A drive roll design combines two lower gear-driven rollers with two upper idler/smooth pressure rollers for less scrubbing of the wire, reducing debris generation. An upper idler system doesn't mar the wire, extending contact tip life with cored wires. optimized Aluminum Welding System Miller Electric Mfg. Co., Appleton, Wisconsin, offers the new Millermatic 350P auto body aluminum repair system. The complete welding package is designed to provide high weld quality and simplify repairs on aluminum auto body panels and beds, such as found in the 2015 Ford F-150 truck. The turnkey solution addresses the growing trend of aluminum usage in the automotive market and has been designed to meet challenges posed by welding thin-gauge aluminum, such as warping, distortion and burn-through. Shop ToolS & equipmenT parts Washer Graymills Corp., Chicago, presents its updated, heated thermoplastic Handi Kleen Parts Washer. The new Graymills PH922 integrates the sink and holding tank for improved cleaning and unit stability. Easy to use and maintain, it is designed for quick onsite cleaning of machinery tools and parts. The PH922 has the ability to convert from wash basin to soak tank and back as needed, while providing continuous clean fluid. Plug the drain in the basin and let the pump run for continuous fluid movement, filtration and heat, with the added benefit of mild fluid agitation.

Articles in this issue

view archives of THE SHOP - November '15