AGAM Technical Catalog

Agam Technical Catalog - January 2019

AGAM Technical Catalog Online Edition

Issue link: http://read.uberflip.com/i/673084

Contents of this Issue

Navigation

Page 285 of 453

Angle Pieces Angle Pieces Angle Pieces // E2 6695 Business Parkway Elkridge, MD 21075 USA 1.410.796.6400 tel 1.800.645.0854 tel 1.410.796.0589 fax 1.800.348.2426 fax www.agam.com info@agam.com © Copyright 1998-2019 Agam Group, Ltd. All Rights Reserved, ATC-V09-E1-ENG (2019.01) PH 1005 = 1394 mm PH 1003 = 1418 mm PH 1005 = 1128 mm 30° PH 1003 = 1142 mm PH 1005 = 999 mm 15° PH 1003 = 1006 mm PH 1005 = 482 mm PH 1003 = 489 mm PH 1005 = 550 mm PH 1003 = 565 mm PH 1005 = 687 mm PH 1003 = 712 mm 954 mm (37 ⁹⁄₁₆") 454 mm (17 ⁷⁄₈") 15° 45° All measurements are from point-to-point Toutes les mesures sont de point à point Alle Masse sind von Punkt zu Punkt Todas las medidas son de punto a punto Non-Standard Angles For non-standard angles, the length of a profile cut at an angle is as follows:

Articles in this issue

Links on this page

Archives of this issue

view archives of AGAM Technical Catalog - Agam Technical Catalog - January 2019