AGAM Technical Catalog

Agam Technical Catalog (July 2018)

AGAM Technical Catalog Online Edition

Issue link: http://read.uberflip.com/i/673084

Contents of this Issue

Navigation

Page 375 of 453

Drills and Taps Drills and Taps Tools / Drills and Taps // J1.4 6695 Business Parkway Elkridge, MD 21075 USA 1.410.796.6400 tel 1.800.645.0854 tel 1.410.796.0589 fax 1.800.348.2426 fax www.agam.com info@agam.com © Copyright 1998-2018 AGAM Group, Ltd. All Rights Reserved, ATC-V08-J1-ENG (2018.07) Drill Bit (Actual Size Shown) Corresponding Tap (Actual Size Shown) 4.2 mm Drill Reference: Drill 4.2 mm In the metric system, the size of the drill is equal to the diameter of the screw minus the pitch of the screw. For instance, a tap M10 x 1.5 (1.5 indicates the pitch) has a 10 mm diameter, a 1.5 mm pitch, and requires an 8.5 mm drill. [10 mm tap - 1.5 mm pitch = 8.5 mm drill] For screws, see pages J2.1 - J2.6 No corresponding tap Is available for this drill bit No corresponding tap Is available for this drill bit No corresponding tap Is available for this drill bit 5.0 mm Drill Reference: Drill 5 mm 6.0 mm Drill Reference: Drill 6 mm 6.75 mm Drill Reference: Drill 6.75 mm 8 mm Drill Reference: Drill 8 mm 8.5 mm Drill Reference: Drill 8.5 mm 10.0 mm Drill Reference: Drill 10 mm No. 7 Drill Reference: Drill #7 Tap, M5 x 0.8 Reference: Tap M5 x 0.8 Tap, M6 x 1 Reference: Tap M6 x 1 Tap, M8 x 1.25 Reference: Tap M8 x 1.25 Tap, M10 x 1.5 Reference: Tap M10 x 1.5 Tap, 1/4" Reference: Tap 1/4 x 20 Screw, Drill Bit and Tap Guidelines 3.3 mm Drill Reference: Drill 3.3 mm Tap, M4 x 0.7 Reference: Tap M4 x 0.7

Articles in this issue

Links on this page

Archives of this issue

view archives of AGAM Technical Catalog - Agam Technical Catalog (July 2018)