AGAM Technical Catalog Online Edition
Issue link: http://read.uberflip.com/i/673084
6695 Business Parkway Elkridge, MD 21075 USA 1.410.796.6400 tel 1.800.645.0854 tel 1.410.796.0589 fax 1.800.348.2426 fax www.agam.com info@agam.com C10.7 © Copyright 1998-2019 Agam Group, Ltd. All Rights Reserved, ATC-V09-C10-ENG (2019.01) FH Components // FH Panel Gasket Reference: 808 For Use With: FH451, FH452 Lengths: Up to 96" (2438 mm) Colors: Available in Gray Material: Plastic To Scale: Page F4.2 ` FH Panel Gasket Assembly Overview FH Panel Gasket shown with FH452 The FH Panel Gasket gives the flexibility for 1/8" panel installations on FH451 and FH452 frames, creating a flush panel appearance. This innovative approach also allows for hard panel installation on one side (or both sides) and SEG fabric on the other. 41.3 mm (1¹¹⁄₁₆") 32 mm (1¹⁄₄") 19 mm (³⁄₄") 13 mm (¹⁄₂") 15.5 mm (⁵⁄₈") 6.4 mm (¹⁄₄") 45.5 mm (1¹³⁄₁₆") 32 mm (1¹⁄₄") 49.5 mm (1¹⁵⁄₁₆") FH452 Extrusion with FH Panel Gasket FH Panel Gasket 1/8" PANEL 6.4 mm (¹⁄₄") Cross section showing 1/8" Panel and Magnetic Strip 1/8" PANEL (Outside) ADHESIVE MAGNET STRIP "B" 1" Wide 1/16" Thickness 1/8" PANEL (Inside) ADHESIVE MAGNET STRIP "A" 1" Wide 1/16" Thickness Insert FH Panel Gasket On FH452 Extrusion 1 2 3 4 Apply Magnetic Strip to Inside of Hard Panel Apply Magnetic Strip to FH Panel Gasket Pivot Hard Panel Into Place Creating Flush Appearance Hard Panel Installation Using FH Panel Gasket Dual FH Panel Gasket with Hard Panel Installation Traditional SEG Fabric Installation Additional Media: Additional Media: