AGAM Technical Catalog

Gusset Plates // C12.4 6695 Business Parkway Elkridge, MD 21075 USA 1.410.796.6400 tel 1.800.645.0854 tel 1.410.796.0589 fax 1.800.348.2426 fax www.agam.com info@agam.com © Copyright 1998-2019 Agam Group, Ltd. All Rights Reserved, ATC-V09-C12-ENG (2019.01) Inside Corner Plate Reference: 403 01 Includes: 2 PS8, 2 DIN912 M5 x 10 screws Finish: Silver Tex powder coat paint Hex Keys: 2.5 mm Weight: 0.37 lbs 148 mm (5³⁄₁₆") 38 mm (1¹⁄₂") 148 mm (5³⁄₁₆") 19 mm (³⁄₄") FH Angle Bracket FH Angle Bracket Reference: 512 01 Includes: 2 CBX42 at 45º, installed Hex Key: 5 mm Weight: 0.79 lbs 305 mm (12") 45° 217mm (8⁹⁄₁₆") 19 mm (³⁄₄") 45.5 mm (1¹³⁄₁₆") 45° 215.7 mm (8¹⁄₂") 215.7 mm (8¹⁄₂") "In-Use" Measurements Additional Media: View 3D Model

• AGAM Technical Catalog (July 2013 Release)
• // Section B : This section is presently empty
• // Section K : This section is presently empty
• // Section N : This section is presently empty
• // Section 0 : This section is presently empty
• // Section P : This section is presently empty
• // Section Q : This section is presently empty
• // Section R : This section is presently empty
• // Section S : This section is presently empty
• // Section T : This section is presently empty
• // Section U : This section is presently empty
• // Section V : This section is presently empty
• // Section W : This section is presently empty
• // Section X : This section is presently empty
• // Section Y : This section is presently empty
• AGAM Group, Ltd. Contact Info
• 6695 Business Parkway
• Elkridge, MD 21075 USA
• 1.410.796.6400 tel
• 1.800.645.0854 tel
• 1.410.796.0589 fax
• 1.800.348.2426 fax
• www.agam.com
• info@agam.com
• // Introduction
• About AGAM Group, Ltd.
• Terms and Conditions
• Table of Contents
• A1.0 : Vertical Extrusions
• A2.0 : Horizontal Extrusions
• A3.0 : Other Extrusions
• A4.0 : Plastic Extrusions
• A6.0 : Fabric Holding Extrusions
• // Section C : Accessories
• C1 : CBX Connectors
• C2 : End Caps
• C3 : Shelving
• C4 : Connectors
• C5 : Inserts, Levelers, Casters, Floor Bases and Stand Supports
• C6 : Accessories
• C7 : Ceiling
• C8 : Doors
• C9 : Lighting
• C10 : FH Components
• C11 : Connecting Node Series
• C12 : Plate Series
• C14 : iPad Display Stands
• // Section D : Countertop Templates
• Counterop Templates
• Corner Formulas
• // Section E : Machining
• Cutting Overview
• Angle Pieces
• Miter Connector Diagrams
• Special Milling
• Tapping Overview
• Welding Overview
• Waterjet Overview
• CNC Machining Center Overview
• // Section F : Extrusions To Scale
• F3.0 : Other Extrusions To Scale
• F4.0 : Plastic Extrusions To Scale
• F6.0 : Fabric Holding Extrusions To Scale
• // Section G : Panel Grids
• Horizontal Grid
• Vertical Grid
• // Section H : Powder Coating
• H1 : Color Swatches
• H2 : Texture Swatches
• // Section I : Curves
• Equipment Overview
• 1/4 Circle Curve
• Arched Curve
• S Curve
• // Section J : Tools and Screws
• J2 : Screws
• // Section L : Measurement Conversion
• Measurement Conversion Chart
• // Section M : Truss System
• M0 : Table of Contents
• // Section N : Cable Beam System
• // Section O : Aluminum Cladding System
• // Section Z : Product Index
• Z1 : Index By Product Name
• Z2 : Index By Reference