Issue link: http://read.uberflip.com/i/706713
www.SugarProducer.com 21 www.SugarProducer.com 21 ● SCHLAGEL MANUFACTURING www.schlagel.net SCHLAGEL RAPID-TILL e new Schlagel Rapid-Till is designed to pull easier due to its new style shank and lighter weight and perform better at higher speeds than the original Schlagel Till-N-Plant. e rapid-till is designed to till up to 10 inches deep, apply fertilizer in multiple zones and, depending on soil conditions, run up to 8 mph and make a perfect seed bed. e Schlagel Rapid-Till comes in many di erent con gurations from 4-to-24 rows and rows as narrow as 20 inches on a single tool bar ● GREAT PLAINS MANUFACTURING INC. 785-823-3276 www.GreatPlainsAg.com GREAT PLAINS SHORT DISK e Great Plains Short Disk is an aggressive primary tillage tool that utilizes 24-inch blades on individual, heavy-duty C-shanks, ganged and angled 18-degrees on the front and 14-degrees on the back. Ten-inch spacing produces excellent residue ow. Cast hubs with preset tapered bearings handle side-loading more reliably than competitive ball bearings. ese maintenance-free bearings have a six-lip seal on each side to lock in grease and prevent contamination. Low-concavity Vegamatic blades size and bury residue better than notched blades used on competitive models. e short disk's design endures high-residue eld conditions, running at higher speeds while achieving excellent cutout. ● LANDOLL/BRILLION 855-320-0373 www.brillionfarmeq.com www.landoll.com 3630 SERIES PULVI-MULCHERS Landoll Corporation features the Brillion Farm Equipment 3630 Series Pulvi-Mulchers. Wider working widths, increased trash clearance and reduced downtime were the design parameters used to develop two new models in the series, available in 30-foot and 36-foot, 6-inch working widths. e new 36.6-foot model in the 3630 Series is 20 percent wider than Brillion's current 30-foot WL Pulvi-Mulcher and is the widest and heaviest Pulvi-Mulcher ever produced in the company's history. e new 30-foot model is 80 percent heavier than previous models, providing more clod-crushing power. A minimum of 24 inches between shank rows and three rows of heavy-duty S-Tine shanks featuring 25 inches of under-frame clearance result in improved trash ow. To ensure a smooth nish, a leveling bar is located in front of the rear roller to help level ridges le by the shanks. Large 8-inch roller axles eliminate the traditional center bearing, improve reliability and reduce downtime. n ● WISHEK TILLAGE EQUIPMENT 800-688-3300 www.wishekmfg.com WISHEK DISC HARROWS With strength designed into every machine, Wishek disc harrows are heavy-duty machines that have the heaviest weight-per-blade speci cations in the industry. is allows Wishek disc harrows to work in almost all soil conditions and crop residue. Disc gangs are set at an angle in order to mix residue regardless of eld and residue conditions with just the right amount of soil to help create an ideal seed bed. Wishek disc harrows are available in two models—o set and tandem—and a wide array of sizes.