Issue link: http://read.uberflip.com/i/827403
88 • June 2017 • S I G N & D I G I T A L G R A P H I C S Product Review INK SET FOR GLASS PRINTING STS Inks, Boca Raton, Florida, introduces a revolutionary new ink formula for printing directly onto glass and other hard, non- porous surfaces. Primat-Ink contains a special resin that gives the user a longer-lasting product when printing onto glass, stainless steel and other non-absorbent surfaces. Unlike UV-cure printing processes, Prismat-Ink is guaranteed to last for 10 years. STS Inks developed Prismat-Ink as a solvent, so it doesn't run through the glass or other hard substrates. Designed for use with digital printers, there is no set-up time necessary to utilize Prismat- Ink, and it prints in the full black and white and CMYK spectrum. Prismat-Ink is currently available for commercial distribution. For more information, visit www.stsinks.com. DYE SUB PRINTER Mutoh America, Phoenix, Arizona, introduces the ValueJet 1948WX, a 75″-wide printer made for high- production dye-sublimation transfer printing. The VJ 1948WX provides outstanding performance at a competitive price with a four-staggered printhead design and blazing fast print speeds up to 2,199 square feet an hour on a variety of dye-sublimation papers. The printer also includes large dual heaters for quick dry times and adjustable pressure rollers for better paper handling. Additionally the printer offers high-quality printing at 1440 dpi, four or eight-color capability, dual heaters for fast dry times and accelerated production speeds, pressure rollers that can be raised up and down depending on material type to remove wrinkles. For more information, visit www.mutoh.com. NEW DIGITAL TABLE CUTTER Vanguard Digital Printing Systems, Suwanee, Georgia, introduces the VC 300R, a digital cutting table built for dependability and toughness on any application. This workhorse digital finishing system can handle flat substrates up to 1.9″ thick, and offers a generous cutting area of 66″ x 125″. The system also includes three differ- ent cutting tools for maximum finishing versatility. For more infor- mation, visit http://vanguarddigital.com. STRUCTURELITE C-CHANNEL Gyford Productions, Reno, Nevada, introduces Structurelite C-Channel Extrusion. This product is intended for mounting floor to ceiling resin, acrylic or polycarbonate panels and is supplied in standard sized 1.25″ wide x 2.125″ high x 100″ long 6063-T5 clear anodized aluminum bars. The 1.75″ x 0.556″ slot is centered to hold .375″ material using the C-Channel Installation Kit (SL-CHNLKIT). Additional packaging fee will apply for lengths over 34″. For information, visit standoffsystems.com. See our ad on page 29 CUTTING PLOTTER GCC, Walnut, California, introduces the Jaguar V series cutting plotter. It is available in four sizes: 61cm, 101cm, 132cm and 183cm. The Jaguar V series vinyl cutting plotters include the Jaguar V models and Jaguar V LX models. The Jaguar V models are an advanced version of Jaguar II and are without Automatic-Aligning System while the Jaguar V LX models come from the Jaguar IV series and include AAS. The Jaguar V series cutting plotters are equipped with a maximum of 600-gram cutting force and 60 ips (1530 mm/sec) cutting speed, which can not only facilitate the completion of different cutting jobs but extend the possibilities of your business. For information, visit www.GCCworld.com. See our ad on page 3