Sign & Digital Graphics

WRAPS '17

Issue link: http://read.uberflip.com/i/834849

Contents of this Issue

Navigation

Page 87 of 128

2 0 1 7 • WRAPS • 73 As soon as you get all the way across to the end, it is recommended to squeegee down the flat areas pushing the air out to the ends. Once you have applied the film and have reached the ends, the only thing left to finish will be lifting and feeding the film as much and as possible inside the small groves and re-tuck the film again with a semi-soft squeegee before trimming. Never work from the edge of the graphic toward the center or from an open edge to a sealed edge, such as where the panels overlap. Just in case you may need to lift the film to recover from any unforeseen situation. Immediately after, go ahead and post-heat the applied films. DON'T HAVE TIME TO SHOP? Let Sign & Digital Graphics bring the industry's straight to your inbox! BEST PRODUCTS DEALS & Manage all of your email preferences in one easy location: WWW.SDGMAG.COM

Articles in this issue

Links on this page

view archives of Sign & Digital Graphics - WRAPS '17