Fleet Management News & Business Info | Commercial Carrier Journal
Issue link: http://read.uberflip.com/i/85081
PRODUCTS NEW Scissor lift Hunter's RX16 scissor lift combines a space-saving low-profile design with added power and advanced features. The dual-capacity system offers the ground-clearance advantages of a standard-capacity lift to handle most vehicles, yet adds Hunter's Power-Up feature to boost capacity if needed. Surface-mount installations offer a 76-inch maximum height and a low drive- on height of 9 inches, allowing clearance for vehicles with low ride height or low-hanging spoilers. The RX16 also can be installed in a shallow recess that sets the runways flush to the floor when fully lowered. Hunter's Hi-Speed feature has a two-stage hydraulic pump that controls the fast rise and de- scent and also slows the lift automatically during the last several inches of descent. Two 9,000-pound- capacity swing air jacks lift vehicles off runways during alignment procedures and other service operations. Stainless-steel turnplates come standard, with Power- Slide turnplates available. ➡ Hunter Write 200 on Reader Service Card or visit www.ccjdigital. com/info Power take-off Parker Chelsea's 877 Series power take-off is designed with a compact housing that helps eliminate clearance issues and offers two assembly arrangements to maximize instal- lation possibilities. High-capacity bearings and gear designs provide torque ratings up to 670 lb.-ft. without derating the PTO for continuous applications. The 877 Series has a 10-bolt mounting pattern to fit on most automatic transmissions, while eight internal gear ratios provide a wide variety of speeds to meet additional applications. Direct-mount pump flange options are available with a wet spline design that helps increase PTO and pump shaft life. ➡ Parker Chelsea Write 201 on Reader Service Card or visit www.ccjdigital.com/info Disc brake axle Ridewell's disc brake axle is available with Wabco Pan 22 air disc brakes, a 5-inch-diameter axle, a parallel spindle and a hub-piloted 11¼-inch-diameter bolt-circle long stud for aluminum wheels. The axle beam rating is 23,000 pounds with a ½-inch wall or 25,000 pounds with a ¾-inch wall. Standard 71½-inch- and 77½-inch-track disc brake axles are available upon order; custom track widths also are available. ➡ Ridewell Write 202 on Reader Service Card or visit www. ccjdigital.com/info COMMERCIAL CARRIER JOURNAL | JANUARY 2012 67