Sign & Digital Graphics

February '18

Issue link: http://read.uberflip.com/i/930386

Contents of this Issue

Navigation

Page 36 of 88

32 • February 2018 • S I G N & D I G I T A L G R A P H I C S Has your shop recently finished an outstanding sign or wrap job? We know you're proud of your best work and we want to help you show it off. You can share your work with Sign & Digital Graphics readers and be seen in the pages of our magazine. Simply fill out the forms for Signage Submissions or Wraps Submissions on our website, upload your photos and we'll take care of the rest. Visit http:// sdgmag.com/sign-project-submission to make a sign project submission. Sign Projects Lumber Sign Ron Kemmel of Kemmel Design LLC created this sign for Lumber Sales & Products. Kemmel Design LLC is a full- service sign shop in Kewaskum, Wisconsin. "This is a rough sawn cedar ground sign finished this past summer," Kemmel says. "For the frame work of the structure we started with 8˝ x 8˝ cedar posts. The over- size is 13´ x 13´ single-sided. Every aspect was designed and built by hand. The sign panels are digitally printed on 3M material, printed on a Roland. The pieces are fin- ished with matte laminate. The sign panels are stepped off 2˝ for added depth. The sign was then finished with an exterior stain. Brushed aluminum address letters were installed for the final touch." SDG

Articles in this issue

Links on this page

view archives of Sign & Digital Graphics - February '18