Installation Guide

Big data Cumulus-Linux installation guide

Issue link:

Contents of this Issue


Page 8 of 26

B U I L D I N G A D AT A C E NT E R N E T W O R K W I T H C U M U L U S L I N U X T O R U N A P A C H E H A D OO P 9 1. Diagram your Network Architecture. An example network architecture diagram is shown below in Figure 6. Figure 6. Example Network Architecture 2. Determine which IP Address Each Node Uses For your site, enumerate your network nodes, their loopback IP addresses and the addresses to use on the leaf switches for VLANs. For example: Node Loopback VLAN Subnet spine01 N/A spine02 N/A leaf01 leaf02 leaf03 leaf04 edge-leaf01 N/A edge-leaf02 N/A 3. Determining How Your Cluster Connects to Your Core Network You need to determine which routing protocols and IP addresses your cluster will use to connect to your core network. The details of this are outside of the scope of this document, but you may need to reference the Cumulus Linux Documentation along with documentation for the network devices to which the edge-leaf switches will connect.

Articles in this issue

Links on this page

view archives of Installation Guide - Big data Cumulus-Linux installation guide