USA - Headquarters
7665 Commerce Way
Eden Prairie, MN 55344, USA
+1 952 937 3000
ISRAEL - Headquarters
1 Holtzman St., Science Park
PO Box 2496
Rehovot 76124, Israel
+972 74 745 4000
stratasys.com
ISO 9001:2015 Certified
EMEA
Airport Boulevard B 120
77836 Rheinmünster, Germany
+49 7229 7772 0
ASIA PACIFIC
7th Floor, C-BONS International Center
108 Wai Yip Street Kwun Tong Kowloon
Hong Kong, China
+ 852 3944 8888
GET IN TOUCH.
www.stratasys.com/contact-us/locations
Spec
Sheet
1
© 2021 Stratasys Ltd. All rights reserved. Stratasys, Stratasys signet and Neo are trademarks or registered trademarks of Stratasys Ltd.
and/or its subsidiaries or affiliates and may be registered in certain jurisdictions. All other trademarks belong to their respective owners.
Product specifications subject to change without notice. PSS_SL_UV800_A4_0821a
The UV800 oven & hot box for the complete Stratasys Neo
®
3D printing solution.
The UV800 has been developed so that parts printed on the Neo can undergo a final post-cure process, optimizing and improving
strength and performance of each part.
Designed with high intensity UV lamps and a turntable, the UV800 is controlled via PLC with HMI touchscreen and has pre-
programmed post-curing cycles for ease of use.
The UV800 also features a heated resin store, so top up resin is maintained at the correct vat temperature.
Stratasys UV800
Specifications
Electrical Requirements
Rated Voltage VAC 220 ~ 240
Hz 50/60
Peak Power W 1450
Peak Current A 6.5
Typical Power W 950
Typical Current A 4.0
Environment Requirements
Temperature Range
°C 17 ~ 25
°F 62 ~ 77
Heat Dissipation
W 950
Btu/h 3250
Weight & Dimensions
Dimensions (W x D x H) mm 1250 x 1250 x 1896
in 49.2 x 49.2 x 74.7
Weight kg 300
Ib 661
Regulatory Conformity
