Issue link: https://read.uberflip.com/i/1428302
TR9-1.0.0 Roaming Configuration Guidelines ©2021 LoRa ® Alliance Page 6 of 10 The authors reserve the right to change specifications without notice. 3 Configuration Parameters 92 93 Table 1 lists the configuration that needs to be made on the NS (Own) for a given roaming 94 partner (Peer). 95 96 Two NSs that have a roaming agreement interconnect with each other using the sNS-fNS 97 interface [TS2-1.0.0, TS2-1.1.1] either directly (i.e., peer-to-peer setup), or via an 98 intermediary acting as transparent proxy towards each peer (a.k.a., roaming hub). 99 100 Configuration Parameter Type When Using Peer-to-Peer Interconnection When Using Hub-Based Interconnection Peer NetID(s) MUST be NetID assigned by the LoRa Alliance. MUST NOT be value 0 or 1. With the LoRaWAN Backend Interfaces 1.1 Specification [TS2- 1.1.0], using values 0 or 1 will be allowed for the Peer only when its end-devices do not roam into the Own network. MUST be NetID assigned by the LoRa Alliance. MUST NOT be value 0 or 1. With the LoRaWAN Backend Interfaces 1.1 Specification, using values 0 or 1 will be allowed for the Peer only when its end-devices do not roam into the Own network. Roaming Policy Whether the Own end-devices are allowed to - roam out to the Peer network, - activate in the Peer network. Whether the Peer end-devices are allowed to - roam into the Own network, - activate in the Own network. Whether the Own end-devices are allowed to - roam out to the Peer network, - activate in the Peer network. Whether the Peer end-devices are allowed to - roam into the Own network, - activate in the Own network. Peer Channel Plan Required if the Own end-devices roam out to the Peer network. Required if the Own end-devices roam out to the Peer network. UDR Type Counting frames vs. devices (only applicable to [TS2-1.1.0]). Counting frames vs. devices (only applicable to [TS2-1.1.0]). Peer fNS URL URL to reach the fNS functionality of the Peer NS. Not needed Peer sNS URL URL to reach the sNS functionality of the Peer NS. Not needed Peer NS IP Address(es) Required if a firewall is used on the Own network. Not needed Peer NS HTTP Authentication Credentials User ID and password and/or certificate credentials. Not needed Peer JS URL(s) URLs to reach each JS that has hNS-JS interface with the Peer NS. Not needed if the JS JoinEUI is registered in LoRaWAN-DNS [TS2-1.0.0]. Not needed
