Issue link: https://read.uberflip.com/i/1428341
RP002-1.0.0 LoRaWAN Regional Parameters ©2019 LoRa Alliance ® Page 7 of 88 The authors reserve the right to change specifications without notice. Table 88: RU864-870 TX Data rate table ............................................................................ 79 289 Table 89: RU864-870 TX power table ................................................................................. 79 290 Table 90: RU864-870 ChMaskCntl value table.................................................................... 80 291 Table 91: RU864-870 maximum payload size (repeater compatible) .................................. 81 292 Table 92 : RU864-870 maximum payload size (not repeater compatible)............................ 81 293 Table 93: RU864-870 downlink RX1 data rate mapping ...................................................... 81 294 Table 93: RU864-870 beacon settings ................................................................................ 82 295 Table 95 : LoRa physical layer settings ............................................................................... 83 296 Table 96 : FSK physical layer settings ................................................................................ 84 297 298 Figures 299 Figure 1: US902-928 channel frequencies .......................................................................... 28 300 Figure 2: AU915-928 channel frequencies .......................................................................... 43 301 Figure 3: LoRa PHY structure ............................................................................................. 83 302 Figure 4: FSK PHY structure ............................................................................................... 84 303 304 1 Introduction 305 306 This document describes the LoRaWAN™ regional parameters for different regulatory regions 307 worldwide. This document is a companion document to the various versions of the LoRaWAN 308 MAC Layer Protocol Specification [TS001]. Separating the regional parameters from the 309 protocol specification allows addition of new regions to the former without impacting the latter 310 document. 311 312 This document combines regional parameters aspects defined in all LoRaWAN protocol 313 specifications, with differences arising from LoRaWAN versions highlighted at each 314 occurrence. 315 This document references TS001-1.0.4, which is in final draft form at the 316 time of the publication of RP002-1.0.0 (this document). These 317 references are clearly highlighted in the text of this document. 318 319 Where various attributes of a LoRa transmission signal are stated with regard to a region or 320 regulatory environment, this document is not intended to be an authoritative source of regional 321 governmental requirements and we refer the reader to the specific laws and regulations of the 322 country or region in which they desire to operate to obtain authoritative information. 323 324 It must be noted here that, regardless of the specifications provided, at no time is any 325 LoRaWAN equipment allowed to operate in a manner contrary to the prevailing local rules and 326 regulations where it is expected to operate. It is the responsibility of the LoRaWAN end-device 327 to ensure that compliant operation is maintained without any outside assistance from a 328 LoRaWAN network or any other mechanism. 329 1.1 Conventions 330 331 The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", 332 "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" 333
