Document

RP002-1.0.0 LoRaWAN® Regional Parameters

Issue link: https://read.uberflip.com/i/1428341

Contents of this Issue

Navigation

Page 83 of 87

RP002-1.0.0 LoRaWAN Regional Parameters ©2019 LoRa Alliance ® Page 84 of 88 The authors reserve the right to change specifications without notice. 1699 Size (bytes) 5 3 1 L bytes from PHYPayloadLength 2 Packet Structure Preamble SyncWord PHYPayloadLength PHYPayload CRC Figure 4: FSK PHY structure 1700 1701 3.2.2 FSK settings 1702 In order to be fully compliant with LoRaWAN, an end device SHALL configure the FSK 1703 physical layer as follows: 1704 1705 Parameter Uplink value Downlink value Preamble size 5 bytes SyncWord 0xC194C1 Bitrate 50000 bit/sec Tx frequency deviation 25kHz (SSB 1 ) Rx bandwidth 50kHz (SSB) Rx bandwidth AFC 80kHz (SSB) CRC presence True (CRC-CCITT) Gaussian filter BT = 1,0 DC Free Encoding Whitening Encoding Table 96 : FSK physical layer settings 1706 1707 To avoid a non-uniform power distribution signal with the FSK modulation, a Data Whitening 1708 DC-Free data mechanism is used as shown in the above table. 1709 1710 1711 1 SSB : Single Side Bandwidth

Articles in this issue

view archives of Document - RP002-1.0.0 LoRaWAN® Regional Parameters