LoRaWAN Application Layer Clock
Synchronization v1.0.0 Specification
©2018 LoRa Alliance™ Page 10 of 13
The authors reserve the right to change
specifications without notice.
The ForceDeviceResyncReq command has a single byte payload. 272
273
Field ForceConf
Size (bytes) 1
Table 11: ForceDeviceResyncReq 274
Where: 275
276
ForceConf Fields RFU NbTransmissions
Size (bits) 5bits 3bits
Table 12: ForceConf fields 277
There is no ForceDeviceResyncAns message. The end-device responds by sending up to 278
NbTransmissions AppTimeReq messages with the AnsRequired bit set to 0. The end- 279
device stops re-transmissions of the AppTimeReq if a valid AppTimeAns is received. If the 280
NbTransmissions field is 0, the command SHALL be silently discarded. 281
The delay between consecutive transmissions of the AppTimeReq is application specific. 282
283
