Issue link: https://read.uberflip.com/i/1428359
LoRaWAN 1.0.3 Regional Parameters ©2018 LoRa™ Alliance Page 39 of 71 The authors reserve the right to change specifications without notice. 895 TXPower Configuration (EIRP) 0 Max EIRP 1..14 Max EIRP – 2*TXPower 15 RFU Table 36 : AU915-928 TX power table 896 897 EIRP refers to the Equivalent Isotropically Radiated Power, which is the radiated output 898 power referenced to an isotropic antenna radiating power equally in all directions and whose 899 gain is expressed in dBi. 900 901 By default MaxEIRP is considered to be +30dBm. The Max EIRP can be modified by the 902 network server through the TxParamSetupReq MAC command and SHOULD be used by 903 both the end-device and the network server once TxParamSetupReq is acknowledged by 904 the device via TxParamSetupAns. 905 906 2.6.4 AU915-928 JoinAccept CFList 907 908 The AU915-928 LoRaWAN supports the use of the optional CFlist appended to the 909 JoinResp message. If the CFlist is not empty then the CFListType field SHALL contain the 910 value one (0x01) to indicate the CFList contains a series of ChMask fields. The C hMask 911 fields are interpreted as being controlled by a virtual ChMaskCntl that initializes to a value of 912 zero (0) and increments for each ChMask field to a value of four(4). (The first 16 bits 913 controls the channels 1 to 16, ..) 914 Size (bytes) [2] [2] [2] [2] [2] [2] [3] [1] CFList ChMask0 ChMask1 ChMask2 ChMask3 ChMask4 RFU RFU CFListType 915 2.6.5 AU915-928 LinkAdrReq command 916 For the AU915-928 version the ChMaskCntl field of the LinkADRReq command has the 917 following meaning: 918 919 920 ChMaskCntl ChMask applies to 0 Channels 0 to 15 1 Channels 16 to 31 .. .. 4 Channels 64 to 71 5 8LSBs controls Channel Blocks 0 to 7 8MSBs are RFU 6 All 125 kHz ON ChMask applies to channels 64 to 71 7 All 125 kHz OFF ChMask applies to channels 64 to 71