Issue link: https://read.uberflip.com/i/1428359
LoRaWAN 1.0.3 Regional Parameters ©2018 LoRa™ Alliance Page 59 of 71 The authors reserve the right to change specifications without notice. 1433 DataRate Configuration Indicative physical bit rate [bit/s] 0 LoRa: SF12 / 125 kHz 250 1 LoRa: SF11 / 125 kHz 440 2 LoRa: SF10 / 125 kHz 980 3 LoRa: SF9 / 125 kHz 1760 4 LoRa: SF8 / 125 kHz 3125 5 LoRa: SF7 / 125 kHz 5470 6 RFU RFU 7 FSK: 50 kbps 50000 8..15 RFU Table 70: IN865-867 TX Data rate table 1434 1435 The TXPower table indicates power levels relative to the Max EIRP level of the end-device, 1436 as per the following table: 1437 1438 TXPower Configuration (EIRP) 0 Max EIRP 1 Max EIRP – 2dB 2 Max EIRP – 4dB 3 Max EIRP – 6dB 4 Max EIRP – 8dB 5 Max EIRP – 10dB 6 Max EIRP – 12dB 7 Max EIRP – 14dB 8 Max EIRP – 16dB 9 Max EIRP – 18dB 10 Max EIRP – 20dB 11..15 RFU Table 71: IN865-867 TxPower table 1439 1440 EIRP refers to the Equivalent Isotropically Radiated Power, which is the radiated output power 1441 referenced to an isotropic antenna radiating power equally in all directions and whose gain is 1442 expressed in dBi. 1443 By default MaxEIRP is considered to be 30dBm. If the end-device cannot achieve 30dBm 1444 EIRP, the Max EIRP SHOULD be communicated to the network server using an out-of-band 1445 channel during the end-device commissioning process. 1446 1447 2.10.4 IN865-867 JoinAccept CFList 1448 The India 865-867 ISM band LoRaWAN implements an optional channel frequency list 1449 (CFlist) of 16 octets in the JoinAccept message. 1450 In this case the CFList is a list of five channel frequencies for the channels three to seven 1451 whereby each frequency is encoded as a 24 bits unsigned integer (three octets). All these 1452 channels are usable for DR0 to DR5 125kHz LoRa modulation. 1453