LoRaWAN® Regional Parameters v1.0.3revA

Issue link:

Contents of this Issue


Page 6 of 70

LoRaWAN 1.0.3 Regional Parameters ©2018 LoRa™ Alliance Page 7 of 71 The authors reserve the right to change specifications without notice. 1 Introduction 266 267 This document describes the LoRaWAN™ regional parameters for different regulatory regions 268 worldwide. This document is a companion document to the LoRaWAN 1.0.3 protocol 269 specification [LORAWAN]. Separating the regional parameters from the protocol specification 270 allows addition of new regions to the former without impacting the latter document. 271 272 It must be noted here that, regardless of the specifications provided, at no time is any LoRa 273 equipment allowed to operate in a manner contrary to the prevailing local rules and regulations 274 where it is expected to operate. It is the responsibility of the LoRa device to insure that 275 compliant operation is maintained without any outside assistance from a LoRa network or any 276 other mechanism. 277 1.1 Conventions 278 279 The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", 280 "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be 281 interpreted as described in RFC 2119. 282 283 1.2 Quick cross reference table 284 285 In order to support the identification of LoRaWAN channel plans for a given country, the table 286 below provides a quick reference of suggested channel plans listed in priority order for each 287 country. 288 289 290

Articles in this issue

view archives of Document - LoRaWAN® Regional Parameters v1.0.3revA