Issue link: https://read.uberflip.com/i/1428359
LoRaWAN 1.0.3 Regional Parameters ©2018 LoRa™ Alliance Page 65 of 71 The authors reserve the right to change specifications without notice. Table 77: RU864-870 JoinReq Channel List 1545 2.11.3 RU864-870 Data Rate and End-device Output Power encoding 1546 There is no dwell time limitation for the RU864-870 PHY layer. The TxParamSetupReq MAC 1547 command is not implemented in RU864-870 devices. 1548 The following encoding is used for Data Rate (DR) and End-device EIRP (TXPower) in the 1549 RU864-870 band: 1550 1551 DataRate Configuration Indicative physical bit rate [bit/s] 0 LoRa: SF12 / 125 kHz 250 1 LoRa: SF11 / 125 kHz 440 2 LoRa: SF10 / 125 kHz 980 3 LoRa: SF9 / 125 kHz 1760 4 LoRa: SF8 / 125 kHz 3125 5 LoRa: SF7 / 125 kHz 5470 6 LoRa: SF7 / 250 kHz 11000 7 FSK: 50 kbps 50000 8..15 RFU Table 78: RU864-870 TX Data rate table 1552 1553 EIRP 1 refers to the Equivalent Isotropically Radiated Power, which is the radiated output 1554 power referenced to an isotropic antenna radiating power equally in all directions and whose 1555 gain is expressed in dBi. 1556 TXPower Configuration (EIRP) 0 Max EIRP 1 Max EIRP – 2dB 2 Max EIRP – 4dB 3 Max EIRP – 6dB 4 Max EIRP – 8dB 5 Max EIRP – 10dB 6 Max EIRP – 12dB 7 Max EIRP – 14dB 8..15 RFU Table 79: RU864-870 TX power table 1557 1558 1559 1560 By default MaxEIRP is considered to be +16dBm. If the end-device cannot achieve +16dBm 1561 EIRP, the Max EIRP SHOULD be communicated to the network server using an out-of-band 1562 channel during the end-device commissioning process. 1563 1564 2.11.4 RU864-870 JoinAccept CFList 1565 1566 The RU 864-870 ISM band LoRaWAN implements an optional channel frequency list 1567 (CFlist) of 16 octets in the JoinAccept message. 1568 1 ERP = EIRP – 2.15dB; it is referenced to a half-wave dipole antenna whose gain is expressed in dBd