LoRaWAN 1.0.2 Regional Parameters
©2017 LoRa Alliance™ Page 53 of 55
The authors reserve the right to change
specifications without notice.
3 Revisions 1373
3.1 Revision A 1374
Initial revision, the regional parameters were extracted from the LoRaWANV1.0.1 1375
and the Asia/PAC regional cluster definition was added 1376
The ADR command for the US902-928 physical layer was amended to include ADR 1377
MAC command blocks 1378
Added KR920-923 frequency band support 1379
Modified EU868 PHY layer power limit from 14dBm EIRP to 1dBm ERP 1380
3.2 Revision B 1381
expressed all powers either as EIRP or as conducted power depending on regions 1382
Modified SF of US900 classB beacon to SF12/500kHz 1383
Added for each region whether TxParamSetupReq must be supported or not 1384
Added India frequency plan 1385
Added precision regarding FCC profiles that must be supported by US900 devices 1386
Added missing table in 2.6.6 1387
Specified that device must limit power to 10dBm EIRP at frequencies lower than 1388
922MHz in KR920 2.8.4 1389
Added signal polarity in india classB beacon definition 1390
Corrected Missing field names in classB beacon of EU433 1391
Update of the AU915 available data rates : SF12 and SF11 are now allowed 1392
Update of INDIA865 available data rate and TX power definition 1393
1394
