Issue link: https://read.uberflip.com/i/1428371
LoRaWAN Regional Parameters ©2016 LoRa™ Alliance Page 26 of 45 The authors reserve the right to change specifications without notice. 2.5.3 AU915-928 Data Rate and End-point Output Power encoding 1 The TxParamSetupReq MAC command does not have to be implemented by AU915-928 2 devices. 3 4 The following encoding is used for Data Rate (DR) and End-point Output Power (TXPower) 5 in the AU915-928 band: 6 7 DataRate Configuration Indicative physical bit rate [bit/sec] 0 LoRa: SF10 / 125 kHz 980 1 LoRa: SF9 / 125 kHz 1760 2 LoRa: SF8 / 125 kHz 3125 3 LoRa: SF7 / 125 kHz 5470 4 LoRa: SF8 / 500 kHz 12500 5:7 RFU 8 LoRa: SF12 / 500 kHz 980 9 LoRa: SF11 / 500 kHz 1760 10 LoRa: SF10 / 500 kHz 3900 11 LoRa: SF9 / 500 kHz 7000 12 LoRa: SF8 / 500 kHz 12500 13 LoRa: SF7 / 500 kHz 21900 14:15 RFU Table 28: AU915 Data rate table 8 TXPower Configuration 0 30 dBm – 2*TXpower 1 28 dBm 2 26 dBm 3 : 9 …. 10 10 dBm 11:15 RFU Table 29 : AU915 TX power table 9 10 DR4 is identical to DR12, DR8...13 must be implemented in end-devices and are reserved 11 for future applications. 12 2.5.4 AU915-928 JoinAccept CFList 13 The AU915-928 LoRaWAN does not support the use of the optional CFlist appended to the 14 JoinAccept message. If the CFlist is not empty it is ignored by the end-device. 15 2.5.5 AU915-928 LinkAdrReq command 16 For the AU915-928 version the ChMaskCntl field of the LinkADRReq command has the 17 following meaning: 18 19 20 ChMaskCntl ChMask applies to