Issue link: https://read.uberflip.com/i/1428377
LoRaWAN Specification ©2015 LoRa™ Alliance Page 28 of 82 The authors reserve the right to change specifications without notice. 1 Following the convention defined in Section 5.2 the minimum data rate (MinDR) subfield 2 designate the lowest data rate allowed on this channel. For example 0 designates DR0 / 125 3 kHz. Similarly, the maximum data rate (MaxDR) designates the highest data rate. For 4 example, DrRange = 0x77 means that only 50 kbps GFSK is allowed on a channel and 5 DrRange = 0x50 means that DR0 / 125 kHz to DR5 / 125 kHz are supported. 6 The newly defined channel is enabled and can immediately be used for communication. 7 The end-device acknowledges the reception of a NewChannelReq by sending back a 8 NewChannelAns command. The payload of this message contains the following 9 information: 10 Size (bytes) 1 NewChannelAns Payload Status 11 The status (Status) bits have the following meaning: 12 Bits 7:2 1 0 Status RFU Data rate range ok Channel frequency ok 13 Bit = 0 Bit = 1 Data rate range ok The designated data rate range exceeds the ones currently defined for this end- device The data rate range is compatible with the possibilities of the end- device Channel frequency ok The device cannot use this frequency The device is able to use this frequency. Table 9: NewChannelAns status bits signification 14 If either of those 2 bits equals 0, the command did not succeed and the new channel has not 15 been created. 16 5.7 Setting delay between TX and RX (RXTimingSetupReq, 17 RXTimingSetupAns) 18 The RXTimingSetupReq command allows configuring the delay between the end of the TX 19 uplink and the opening of the first reception slot. The second reception slot opens one 20 second after the first reception slot. 21 Size (bytes) 1 RXTimingSetupReq Payload Settings 22 The delay (Delay) field specifies the delay. The field is split in two 4-bit indexes: 23 Bits 7:4 3:0 Settings RFU Del 24 The delay is expressed in seconds. Del 0 is mapped on 1 s. 25 Del Delay [s] 0 1 1 1 2 2 3 3 .. ..
