Issue link: https://read.uberflip.com/i/1428377
LoRaWAN Specification ©2015 LoRa™ Alliance Page 52 of 82 The authors reserve the right to change specifications without notice. 8 Introduction to Class B 1 This section describes the LoRaWAN Class B layer which is optimized for battery-powered 2 end-devices that may be either mobile or mounted at a fixed location. 3 End-devices should implement Class B operation when there is a requirement to open 4 receive windows at fixed time intervals for the purpose of enabling server initiated downlink 5 messages. 6 LoRaWAN Class B option adds a synchronized reception window on the end-device. 7 One of the limitations of LoRaWAN Class A is the Aloha method of sending data from the 8 end-device; it does not allow for a known reaction time when the customer application or the 9 server wants to address the end-device. The purpose of Class B is to have an end-device 10 available for reception on a predictable time, in addition to the reception windows that 11 follows the random uplink transmission from the end-device of Class A. Class B is achieved 12 by having the gateway sending a beacon on a regular basis to synchronize the all the end- 13 devices in the network so that the end-device can opening a short extra reception window 14 (called ―ping slot‖) at a predictable time during a periodic time slot. 15 Note: The decision to switch from Class A to Class B comes from the 16 application layer of the end-device. If this class A to Class B switch 17 needs to be controlled from the network side, the customer application 18 must use one of the end-device's Class A uplinks to send back a 19 downlink to the application layer, and it needs the application layer on 20 the end-device to recognize this request – this process is not managed 21 at the LoRaWAN level. 22
