Issue link: https://read.uberflip.com/i/1428377
LoRaWAN Specification ©2015 LoRa™ Alliance Page 58 of 82 The authors reserve the right to change specifications without notice. 13 Class B Downlink slot timing 1 13.1 Definitions 2 To operate successfully in Class B the end-device must open reception slots at precise 3 instants relative to the infrastructure beacon. This section defines the required timing. 4 The interval between the start of two successive beacons is called the beacon period. The 5 beacon frame transmission is aligned with the beginning of the BEACON_RESERVED 6 interval. Each beacon is preceded by a guard time interval where no ping slot can be placed. 7 The length of the guard interval corresponds to the time on air of the longest allowed frame. 8 This is to insure that a downlink initiated during a ping slot just before the guard time will 9 always have time to complete without colliding with the beacon transmission. The usable 10 time interval for ping slot therefore spans from the end of the beacon reserved time interval 11 to the beginning of the next beacon guard interval. 12 13 Figure 13: Beacon timing 14 Beacon_period 128 s Beacon_reserved 2.120 s Beacon_guard 3.000 s Beacon-window 122.880 s Table 35: Beacon timing 15 The beacon frame time on air is actually much shorter than the beacon reserved time 16 interval to allow appending network management broadcast frames in the future. 17 The beacon window interval is divided into 2 12 = 4096 ping slots of 30 ms each numbered 18 from 0 to 4095. 19 An end-device using the slot number N must turn on its receiver exactly Ton seconds after 20 the start of the beacon where: 21 Ton = beacon_reserved + N * 30 ms 22 N is called the slot index. 23 The latest ping slot starts at beacon_reserved + 4095 * 30 ms = 124 970 ms after the 24 beacon start or 3030 ms before the beginning of the next beacon. 25
