Document

LoRaWAN® Specification v1.0

Issue link: https://read.uberflip.com/i/1428377

Contents of this Issue

Navigation

Page 6 of 81

LoRaWAN Specification ©2015 LoRa™ Alliance Page 7 of 82 The authors reserve the right to change specifications without notice. 1 Introduction 1 This document describes the LoRaWAN™ network protocol which is optimized for battery- 2 powered end-devices that may be either mobile or mounted at a fixed location. 3 LoRaWAN networks typically are laid out in a star-of-stars topology in which gateways 1 4 relay messages between end-devices 2 and a central network server at the backend. 5 Gateways are connected to the network server via standard IP connections while end- 6 devices use single-hop LoRa™ or FSK communication to one or many gateways. 3 All 7 communication is generally bi-directional, although uplink communication from an end- 8 device to the network server is expected to be the predominant traffic. 9 Communication between end-devices and gateways is spread out on different frequency 10 channels and data rates. The selection of the data rate is a trade-off between 11 communication range and message duration, communications with different data rates do 12 not interfere with each other. LoRa data rates range from 0.3 kbps to 50 kbps. To maximize 13 both battery life of the end-devices and overall network capacity, the LoRa network 14 infrastructure can manage the data rate and RF output for each end-device individually by 15 means of an adaptive data rate (ADR) scheme. 16 End-devices may transmit on any channel available at any time, using any available data 17 rate, as long as the following rules are respected: 18 The end-device changes channel in a pseudo-random fashion for every 19 transmission. The resulting frequency diversity makes the system more robust to 20 interferences. 21 The end-device respects the maximum transmit duty cycle relative to the sub-band 22 used and local regulations. 23 The end-device respects the maximum transmit duration (or dwell time) relative to 24 the sub-band used and local regulations. 25 Note: Maximum transmit duty-cycle and dwell time per sub-band are 26 region specific and are defined in the Chapter 6. 27 1.1 LoRaWAN Classes 28 All LoRaWAN devices implement at least the Class A functionality as described in this 29 document. In addition they may implement options named Class B, Class C as also 30 described in this document or others to be defined. In all cases, they must remain 31 compatible with Class A. 32 1 Gateways are also known as concentrators or base stations. 2 End-devices are also known as motes. 3 Support for intermediate elements – repeaters – is not described in the document, however payload restrictions for encapsulation overhead are included in this specification. A repeater is defined as using LoRaWAN as its backhaul mechanism.

Articles in this issue

view archives of Document - LoRaWAN® Specification v1.0