LoRaWAN Specification
©2015 LoRa™ Alliance Page 68 of 82
The authors reserve the right to change
specifications without notice.
Systematic periodic uplink: simplest method that doesn't require demodulation of the 1
―gateway specific‖ field of the beacon. Only applicable to slowly moving or stationery 2
end-devices. There are no requirements on those periodic uplinks. 3
Uplink on cell change: The end-device demodulates the ―gateway specific‖ field of 4
the beacon, detects that the ID of the gateway broadcasting the beacon it 5
demodulates has changed, and sends an uplink. In that case the device should 6
respect a pseudo random delay in the [0:120] seconds range between the beacon 7
demodulation and the uplink transmission. This is required to insure that the uplinks 8
of multiple Class B devices entering or leaving a cell during the same beacon period 9
will not systematically occur at the same time immediately after the beacon 10
broadcast. 11
Failure to report cell change will result in Class B downlink being temporary not operational. 12
The network server may have to wait for the next end-device uplink to transmit downlink 13
traffic. 14
15
16