Document

LoRaWAN® Specification v1.0

Issue link: https://read.uberflip.com/i/1428377

Contents of this Issue

Navigation

Page 48 of 81

LoRaWAN Specification ©2015 LoRa™ Alliance Page 49 of 82 The authors reserve the right to change specifications without notice. 7.4.5 EU433 LinkAdrReq command 1 The CN780 LoRaWAN only supports a maximum of 16 channels. When ChMaskCntl field is 2 0 the ChMask field individually enables/disables each of the 16 channels. 3 4 ChMaskCntl ChMask applies to 0 Channels 1 to 16 1 RFU .. .. 4 RFU 5 RFU 6 All channels ON The device should enable all currently defined channels independently of the ChMask field value. 7 RFU Table 32: ChMaskCntl value table 5 If the ChMask field value is one of the values meaning RFU, then end-device should reject 6 the command and unset the ―Channel mask ACK‖ bit in its response. 7 7.4.6 EU433 Maximum payload size 8 The maximum MACPayload size length (M) is given by the following table. It is derived from 9 limitation of the PHY layer depending on the effective modulation rate used taking into 10 account a possible repeater encapsulation layer. The maximum application payload length in 11 the absence of the optional FOpt control field (N) is also given for information only. The 12 value of N might be smaller if the FOpt field is not empty: 13 14 DataRate M N 0 59 51 1 59 51 2 59 51 3 123 115 4 230 222 5 230 222 6 230 222 7 230 222 8:15 Not defined Table 33: EU433 maximum payload size 15 If the end-device will never operate with a repeater then the maximum application payload 16 length in the absence of the optional FOpt control field should be: 17 18 DataRate M N 0 59 51 1 59 51 2 59 51 3 123 115 4 250 242 5 250 242 6 250 242 7 250 242

Articles in this issue

view archives of Document - LoRaWAN® Specification v1.0