Issue link: https://read.uberflip.com/i/1428377
LoRaWAN Specification ©2015 LoRa™ Alliance Page 65 of 82 The authors reserve the right to change specifications without notice. Example: the first beacon will be transmitted on 923.3Mhz , the second 1 on 923.9MHz, the 9 th beacon will be on 923.3Mhz again. 2 3 4 5 6 Beacon channel nb Frequency [MHz] 0 923.3 1 923.9 2 924.5 3 925.1 4 925.7 5 926.3 6 926.9 7 927.5 7 8 The beacon frame content is: 9 Size (bytes) 3 4 2 7 1 2 BCNPayload NetID Time CRC GwSpecific RFU CRC 10 15.2 Beacon frame content 11 The beacon payload BCNPayload consists of a network common part and a gateway- 12 specific part. 13 14 Size (bytes) 3 4 1/2 7 0/1 2 BCNPayload NetID Time CRC GwSpecific RFU CRC The network common part contains a network identifier NetID to uniquely identify the 15 network for which the beacon is sent, and a timestamp Time in seconds since 00:00:00 16 Coordinated Universal Time (UTC), 1 January 1970. The integrity of the beacon's network 17 common part is protected by an 8 or 16 bits CRC depending on PHY layer parameters. The 18 CRC-16 is computed on the NetID+Time fields as defined in the IEEE 802.15.4-2003 section 19 7.2.1.8. When an 8 bits CRC is required then the 8 LSBs of the computed CRC-16 are used. 20 For example: This is a valid EU868 beacon frame: 21 AA BB CC | 00 00 02 CC | 7E | 00 | 01 20 00 | 00 81 03 | DE 55 22 Bytes are transmitted left to right. The corresponding field values are: 23 24 Field NetID Time CRC InfoDesc lat long CRC Value Hex CCBBAA CC020000 7E 0 002001 038100 55DE The CRC-16 of the NetID+Time fields is 0xC87E but only the 8LSBs are used in that case 25 26 The seven LSB of the NetID are called NwkID and match the seven MSB of the short 27 address of an end-device. Neighboring or overlapping networks must have different 28 NwkIDs. 29
