Issue link: https://read.uberflip.com/i/1428386
LoRaWAN Specification ©2016 LoRa™ Alliance Page 35 of 91 The authors reserve the right to change specifications without notice. 1 Modulation Bandwidth [kHz] Channel Frequency [MHz] FSK Bitrate or LoRa DR / Bitrate Nb Channels LoRa 125 868.10 868.30 868.50 DR0 – DR5 / 0.3-5 kbps 3 Table 13: EU863-870 JoinReq Channel List 2 7.1.3 EU863-870 Data Rate and End-device Output Power encoding 3 The following encoding is used for Data Rate (DR) and End-device Output Power (TXPower) 4 in the EU863-870 band: 5 6 DataRate Configuration Indicative physical bit rate [bit/s] 0 LoRa: SF12 / 125 kHz 250 1 LoRa: SF11 / 125 kHz 440 2 LoRa: SF10 / 125 kHz 980 3 LoRa: SF9 / 125 kHz 1760 4 LoRa: SF8 / 125 kHz 3125 5 LoRa: SF7 / 125 kHz 5470 6 LoRa: SF7 / 250 kHz 11000 7 FSK: 50 kbps 50000 8..15 RFU Table 14: TX Data rate table 7 8 TXPower Configuration 0 20 dBm (if supported) 1 14 dBm 2 11 dBm 3 8 dBm 4 5 dBm 5 2 dBm 6..15 RFU Table 15: TX power table 9 10 7.1.4 EU863-870 JoinAccept CFList 11 12 The EU 863-870 ISM band LoRaWAN implements an optional channel frequency list 13 (CFlist) of 16 octets in the JoinAccept message. 14 In this case the CFList is a list of five channel frequencies for the channels four to eight 15 whereby each frequency is encoded as a 24 bits unsigned integer (three octets). All these 16 channels are usable for DR0 to DR5 125kHz LoRa modulation. The list of frequencies is 17 followed by a single RFU octet for a total of 16 octets. 18 19
