LoRaWAN Specification
©2016 LoRa™ Alliance Page 74 of 91
The authors reserve the right to change
specifications without notice.
Example: the first beacon will be transmitted on 923.3MHz , the 1
second on 923.9MHz, the 9
th
beacon will be on 923.3MHz again. 2
3
4
5
6
Beacon channel nb Frequency [MHz]
0 923.3
1 923.9
2 924.5
3 925.1
4 925.7
5 926.3
6 926.9
7 927.5
7
8
The beacon frame content is: 9
Size (bytes)
3 4
2
7
1 2
BCNPayload
NetID Time
CRC
GwSpecific
RFU CRC
10
16.2 Beacon frame content 11
The beacon payload BCNPayload consists of a network common part and a gateway- 12
specific part. 13
14
Size (bytes)
3 4 1/2 7 0/1 2
BCNPayload
NetID Time CRC GwSpecific RFU CRC
The network common part contains a network identifier NetID to uniquely identify the 15
network for which the beacon is sent, and a timestamp Time in seconds since 00:00:00 16
Coordinated Universal Time (UTC), 1 January 1970. The integrity of the beacon's network 17
common part is protected by an 8 or 16 bits CRC depending on PHY layer parameters. The 18
CRC-16 is computed on the NetID+Time fields as defined in the IEEE 802.15.4-2003 section 19
7.2.1.8. When an 8 bits CRC is required then the 8 LSBs of the computed CRC-16 are used. 20
For example: This is a valid EU868 beacon frame: 21
AA BB CC | 00 00 02 CC | 7E | 00 | 01 20 00 | 00 81 03 | DE 55 22
Bytes are transmitted left to right. The corresponding field values are: 23
24
Field
NetID Time
CRC
InfoDesc lat long
CRC
Value Hex
CCBBAA CC020000
7E
0 002001 038100
55DE
The CRC-16 of the NetID+Time fields is 0xC87E but only the 8LSBs are used in that case 25
26
The seven LSB of the NetID are called NwkID and match the seven MSB of the short 27
address of an end-device. Neighboring or overlapping networks must have different 28
NwkIDs. 29