Issue link: https://read.uberflip.com/i/1428386
LoRaWAN Specification ©2016 LoRa™ Alliance Page 78 of 91 The authors reserve the right to change specifications without notice. 17 Class B unicast & multicast downlink channel frequencies 1 17.1 EU 863-870MHz ISM Band 2 All unicast&multicastClass B downlinks use a single frequency channel defined by the 3 "PingSlotChannelReq" MAC command. The default frequency is 869.525MHz 4 17.2 US 902-928MHz ISM Band 5 By default Class B downlinks use a channel function of the Time field of the last beacon (see 6 Beacon Frame content) and the DevAddr. 7 Class B downlink channel = [ DevAddr + floor ( Beacon_Time Beacon_period ) ] modulo 8 Whereby Beacon_Time is the 32 bit Time field of the current beacon period 8 Beacon_period is the length of the beacon period (defined as 128sec in the 9 specification) 10 Floor designates rounding to the immediately lower integer value 11 DevAddr is the 32 bits network address of the device 12 Class B downlinks therefore hop across 8 channels in the ISM band and all Class B end- 13 devices are equally spread amongst the 8 downlink channels. 14 If the "PingSlotChannelReq" command with a valid non-zero argument is used to set the 15 Class B downlink frequency then all subsequent ping slots should be opened on this single 16 frequency independently of the last beacon frequency. 17 If the "PingSlotChannelReq" command with a zero argument is sent, the end-device 18 should resume the default frequency plan, id Class B ping slots hoping across 8 channels. 19 The underlying idea is to allow network operators to configure end-devices to use a single 20 proprietary dedicated frequency band for the Class B downlinks if available, and to keep as 21 much frequency diversity as possible when the ISM band is used. 22 23
