Issue link: https://read.uberflip.com/i/1428386
LoRaWAN Specification ©2016 LoRa™ Alliance Page 88 of 91 The authors reserve the right to change specifications without notice. 22 Revisions 1 22.1 Revision 1.0 2 Approved version of LoRaWAN1.0 3 22.2 Revision 1.0.1 4 Clarified the RX window start time definition 5 Corrected the maximum payload size for DR2 in the NA section 6 Corrected the typo on the downlink data rate range in 7.2.2 7 Introduced a requirement for using coding rate 4/5 in 7.2.2 to guarantee a maximum 8 time on air < 400mSec 9 Corrected the JoinAccept MIC calculation in 6.2.5 10 Clarified the NbRep field and renamed it to NbTrans in 5.2 11 Removed the possibility to not encrypt the Applicative payload in the MAC layer , 12 removed the paragraph 4.3.3.2. If further security is required by the application , the 13 payload will be encrypted, using any method, at the application layer then re- 14 encrypted at the MAC layer using the specified default LoRaWAN encryption 15 Corrected FHDR field size typo 16 Corrected the channels impacted by ChMask when chMaskCntl equals 6 or 7 in 17 7.2.5 18 Clarified 6.2.5 sentence describing the RX1 slot data rate offset in the JoinResp 19 message 20 Removed the second half of the DRoffset table in 7.2.7 , as DR>4 will never be used 21 for uplinks by definition 22 Removed explicit duty cycle limitation implementation in the EU868Mhz ISM band 23 (chapter7.1) 24 Made the RXtimingSetupAns and RXParamSetupAns sticky MAC commands to 25 avoid end-device's hidden state problem. (in 5.4 and 5.7) 26 Added a frequency plan for the Chinese 470-510MHz metering band 27 Added a frequency plan for the Australian 915-928MHz ISM band 28 29
