Issue link: https://read.uberflip.com/i/1428386
LoRaWAN Specification ©2016 LoRa™ Alliance Page 10 of 91 The authors reserve the right to change specifications without notice. 2 Introduction on LoRaWAN options 1 LoRa™ is a wireless modulation for long-range low-power low-data-rate applications 2 developed by Semtech. Devices implementing more than Class A are generally named 3 "higher Class end-devices" in this document. 4 2.1 LoRaWAN Classes 5 A LoRa network distinguishes between a basic LoRaWAN (named Class A) and optional 6 features (Class B, Class C …): 7 Application LoRa MAC LoRa Modulation EU 868 EU 433 US 915 AS 430 … Class B (beacon) Class C (Continuous) Application MAC MAC options Modulation Regional ISM band Class A (baseline) 8 Figure 1: LoRaWAN Classes 9 Bi-directional end-devices (Class A): End-devices of Class A allow for bi- 10 directional communications whereby each end-device's uplink transmission is 11 followed by two short downlink receive windows. The transmission slot scheduled by 12 the end-device is based on its own communication needs with a small variation 13 based on a random time basis (ALOHA-type of protocol). This Class A operation is 14 the lowest power end-device system for applications that only require downlink 15 communication from the server shortly after the end-device has sent an uplink 16 transmission. Downlink communications from the server at any other time will have to 17 wait until the next scheduled uplink. 18 Bi-directional end-devices with scheduled receive slots (Class B): End-devices 19 of Class B allow for more receive slots. In addition to the Class A random receive 20 windows, Class B devices open extra receive windows at scheduled times. In order 21 for the End-device to open it receive window at the scheduled time it receives a time 22 synchronized Beacon from the gateway. This allows the server to know when the 23 end-device is listening. 24 Bi-directional end-devices with maximal receive slots (Class C): End-devices of 25 Class C have nearly continuously open receive windows, only closed when 26 transmitting. Class C end-device will use more power to operate than Class A or 27 Class B but they offer the lowest latency for server to end-device communication. 28
