Document

LoRaWAN® Specification v1.0.1

Issue link: https://read.uberflip.com/i/1428386

Contents of this Issue

Navigation

Page 36 of 90

LoRaWAN Specification ©2016 LoRa™ Alliance Page 37 of 91 The authors reserve the right to change specifications without notice. If the end-device will never operate with a repeater then the maximum application payload 1 length in the absence of the optional FOpt control field should be: 2 3 DataRate M N 0 59 51 1 59 51 2 59 51 3 123 115 4 250 242 5 250 242 6 250 242 7 250 242 8:15 Not defined Table 18 : EU863-870 maximum payload size (not repeater compatible) 4 7.1.7 EU863-870 Receive windows 5 The RX1 receive window uses the same channel than the preceding uplink. The data rate is 6 a function of the uplink data rate and the RX1DROffset as given by the following table. The 7 allowed values for RX1DROffset are in the [0:5] range. Values in the [6:7] range are 8 reserved for future use. 9 10 11 RX1DROffset 0 1 2 3 4 5 Upstream data rate Downstream data rate in RX1 slot DR0 DR0 DR0 DR0 DR0 DR0 DR0 DR1 DR1 DR0 DR0 DR0 DR0 DR0 DR2 DR2 DR1 DR0 DR0 DR0 DR0 DR3 DR3 DR2 DR1 DR0 DR0 DR0 DR4 DR4 DR3 DR2 DR1 DR0 DR0 DR5 DR5 DR4 DR3 DR2 DR1 DR0 DR6 DR6 DR5 DR4 DR3 DR2 DR1 DR7 DR7 DR6 DR5 DR4 DR3 DR2 12 The RX2 receive window uses a fixed frequency and data rate. The default parameters are 13 869.525 MHz / DR0 (SF12, 125 kHz) 14 7.1.8 EU863-870 Default Settings 15 The following parameters are recommended values for the EU863-870MHz band. 16 RECEIVE_DELAY1 1 s 17 RECEIVE_DELAY2 2 s (must be RECEIVE_DELAY1 + 1s) 18 JOIN_ACCEPT_DELAY1 5 s 19 JOIN_ACCEPT_DELAY2 6 s 20 MAX_FCNT_GAP 16384 21 ADR_ACK_LIMIT 64 22 ADR_ACK_DELAY 32 23 ACK_TIMEOUT 2 +/- 1 s (random delay between 1 and 3 seconds) 24

Articles in this issue

view archives of Document - LoRaWAN® Specification v1.0.1