Issue link: https://read.uberflip.com/i/1428386
LoRaWAN Specification
©2016 LoRa™ Alliance Page 59 of 91
The authors reserve the right to change
specifications without notice.
8 Retransmissions back-off 1
2
Uplink frames that: 3
Require an acknowledgement or an anwser by the network or an application 4
server, and are retransmitted by the device if the acknowledgement or answer is not 5
received. 6
and 7
can be triggered by an external event causing synchronization across a large 8
(>100) number of devices (power outage, radio jamming, network outage, 9
earthquake…) 10
can trigger a catastrophic, self-persisting, radio network overload situation. 11
12
Note: An example of such uplink frame is typically the JoinRequest if 13
the implementation of a group of end-devices decides to reset the 14
MAC layer in the case of a network outage. 15
The whole group of end-device will start broadcasting JoinRequest 16
uplinks and will only stops when receiving a JoinResponse from the 17
network. 18
19
20
For those frame retransmissions, the interval between the end of the RX2 slot and the next 21
uplink retransmission shall be random and follow a different sequence for every device (For 22
example using a pseudo-random generator seeded with the device's address) .The 23
transmission duty-cycle of such message shall respect the local regulation and the following 24
limits, whichever is more constraining: 25
26
Aggregated during the first
hour following power-up or
reset
T0
