LoRa Alliance
5177 Brandin Court,
Fremont, CA 94538 USA
LoRaWAN 1.0.4 End Device Certification Page 147 of 173
Requirements for All Regions Version 1.4
Copyright © 2021 LoRa Alliance, Inc. All rights reserved. www.lora-alliance.org
Step Procedure Frame Sequence Test
Purpose
End Device
- TCL
Frame
The TCL sends Unconfirmed frame
on RX2 window
CP-CMD EchoPayloadReq
FPort = 224
Payload (i) = [0x]08XX
(MaxLen for UL DR-X)
5 DUT sends Unconfirmed frame
→
DataRate = X
CP-CMD EchoPayloadAns
FPort = 224
Payload (i)' = [0x]08XX
(MaxLen for DR-X)
DUT echos
MaxLen
PDU for
each Uplink
DR on RX2
Repeat above Steps 2-5 for all DR in
Max payload size table
6 DUT sends Unconfirmed frame
→
The TCL sends Unconfirmed frame
MAC-CMD LinkADRReq
DataRate = Max125kHzDR,
refer [2]
ChMaskCntl:
DC = 0,
FC = 6
ChMask:
DC - Enable only default
channels
FC = [0x]00FF
MAC-CMD
RxParamSetupReq
RX1DRoffset = 0
RX2DataRate = default DR,
refer [2]
Freq = default frequency,
refer [2]
Payload =
[0x]03XXXXXXXX[0x]05XXX
XXXXX
For FC
device using
8-channel
gateway,
refer to
Section 2 for
ChMask
settings
7 DUT sends Unconfirmed frame
→
MAC-CMD LinkADRAns
MAC-CMD
RxParamSetupAns
Payload = [0x]0307[0x]0507
DUT
reverted to
default
settings
The TCL sends Unconfirmed frames
CP-CMD
RegionalDutyCycleCtrlReq-
ON
FPort = 224
Payload = [0x]0501
8 DUT sends Unconfirmed frame
→
1228
1229
