LoRa Alliance
5177 Brandin Court,
Fremont, CA 94538 USA
LoRaWAN 1.0.4 End Device Certification Page 169 of 173
Requirements for All Regions Version 1.4
Copyright © 2021 LoRa Alliance, Inc. All rights reserved. www.lora-alliance.org
The TCL sends Unconfirmed frame in
RX2 window
MAC-CMD
RXTimingSetupReq
Delay = default, refer [2]
Payload = [0x]08XX
If the uplink was a Confirmed
frame, send ACK
For FC
device using
8-channel
gateway,
refer to
Section 2 for
ChMask
settings
Verify all
RX2 window
parameters
4 DUT sends Confirmed or Unconfirmed
frame
→
MAC-CMD
RXTimingSetupAns
Payload = [0x]08
MAC Command Tests
5 DUT sends Confirmed or Unconfirmed
frame
→
MAC-CMD
RxTimingSetupAns
Payload = [0x]08
The TCL sends Unconfirmed frame
MAC-CMD DevStatusReq
Payload = [0x]06
If the uplink was a Confirmed
frame, send ACK
6 DUT sends Confirmed or Unconfirmed
frame
→
MAC-CMD DevStatusAns
RadioStatus >= - 32 and <=
31
Payload = [0x]06XXXX
DevStatusAn
s sent and
encoded
value tested
The TCL sends Unconfirmed frame
FPort = 0
MAC-CMD NewChannelReq
ChIndex = 7
Freq = any applicable
frequency, refer [2]
Payload =
[0x]07XXXXXXXXXX
If the uplink was a Confirmed
frame, send ACK
7 DUT sends Confirmed or Unconfirmed
frame
→
MAC-CMD NewChannelAns
Payload = [0x]0703 (for DC)
Payload = [0x]0700 or no
response is received (for FC)
NewChannel
added
8 For DC plan devices only :
Wait until the new channel which was
added has been used at least once. Wait
for a maximum of [5* (number of channels
currently enabled on the DUT)] uplink
packets to be sent
→ R
[5*NbC
h] or
[AllCh
used]
Channel added is used at
least once
DUT adds
the
additional
channel to
its default
channel plan
9 DUT sends Confirmed or Unconfirmed
frame
→
